The A-18 represents an ideal introduction to true Hi-fi amplification. It's sleek
design, flexible connectivity and powerful amplifier stages deliver a level of
reproduction far beyond that of "budget" separates systems. Using the
latest in amplifier technology plus over thirty years of audio design
experience the A18 is an astounding amplifier, true to Arcam's tradition of
affordable excellence. Using very high quality components and carefully
designed multi-layer PCBs the A18 is designed for performance from the ground
up. Connectivity is highly flexible allowing direct connection of seven line
level sources including a dedicated 3.5mm front panel jack socket for portable
music players.
Connectivity
* Six RCA
Phono line level rear panel inputs - plenty for even complex systems
* Additional front panel line level input (3.5mm stereo jack) for portable
music players
* High quality Moving Magnet phono input with grounding post
* Two tape outputs on RCA Phono for CD recorders / PVRs
* Pre-amp output for adding additional power amplifiers or bi-amping with P38
* Front panel headphones jack on 3.5mm socket
Power Amplifier
* 50wpc
continuous power output (two channels driven, 8 ohm load)
* Oversize heatsink ensuring cool running
* Dual layer PCB enabling optimum circuit design in all areas
Power supply
* Toroid
mains transformer
* High capacity power supply with "star earthing" for minimal ground
noise
* Switchable mains power inlet 110-120v / 220-240v
General
*
Supplied with CR10 system remote control
* Large, clear 9 character VFD display
* Size - 430mm (17") wide, 332mm (13.1") deep, 85mm (3.3") high
* Weight 7.2kg (15.9lbs) nett, 9.1kg (20.1lbs) packed
$1,249

Slim in appearance but powerfully built the A-28 offers
an ideal balance between power delivery and size. Sophisticated control
electronics offer complete control over seven sources. 75 watts per channel
provide enough drive and control for use with some of the world's best high
performance loudspeakers. The A28's flexibility is due to its microprocessor
control and intelligent software which provides unique features without
compromising amplification performance.
Using wide-band power amplifier technology and ultra stable thermal management
from the range topping A38 amplifier, every detail and musical nuance is
produced with breathtaking accuracy. The A28's pre-amplifier section uses
studio components that ensure extreme fidelity and ultra low noise performance.
Pre-amplifier features
* All electronic input switching for clean signal path and long term
reliability
* Studio grade volume control stage with +/- 0.05dB channel matching
* Six line level inputs plus high quality MM phono input
* Pre-amplifier outputs for bi-amping with Arcam power amplifiers (e.g. P38)
* Separate line level output for second rooms etc.
* Microprocessor control of input volume, balance etc.
* Extra user features such as max turn-on volume, input trims, processor mode
etc.
Power amplifier features
* 75wpc continuous power output (8ohms, both
channels driven)
* 130wpc continuous power output (4ohms, 1kHz, one channel driven)
* Fully discrete transistor power amp stages with temperature compensation
* Current feedback design ensuring wide bandwidth for high resolution audio
* Two pairs of individually selectable gold plated speaker outputs
* All DC coupled signal path for enhanced bass control
Power supply features
* Oversize toroid mains transformer
* User switchable between 115v and 230v mains supplies
* Dual rectified power amp supplies for reduced ground noise
* Separate smoothing per channel to reduce crosstalk
* Independently rectified and regulated pre-amp power supply
General Features
* Supplied with CR90 system remote control
* Large, clear 9 character VFD display
* Size - 430mm (17") wide, 275mm (10.8") deep, 85mm (3.3") high
* Weight 8.5kg (18.7lbs) nett, 10.4kg (22.9lbs) packed
$1,999

The A-38 features new output
device technology which practically eliminates thermal modulation of audio
signals to ensure a truly dynamic and transparent reproduction. The brand new
preamp design using studio grade components and new power amplifier stages
deliver a result which exceeds expectations and raises the bar for specialist
integrated amplifiers in general.
With over 30 years of audiophile engineering experience,
Arcam is one of the UK's most respected audio companies. The new A38 stereo
integrated amplifier is the latest in a long family line of award winning HiFi.
The A38 design team was given a simple goal; to develop the
best performing stereo amplifier Arcam had ever produced. Although a huge task,
the team dug deep into the basic structure of amplifier design and the result
was a remarkable improvement in fidelity.
An in-house research project yielded a wealth of
information concerning the influences of thermal conditions on power amplifier
performance. As a result the A38 features a number of new technologies which
practically eliminate thermal modulation of audio signals and ensure truly
dynamic and enthralling reproduction. New Sanken output devices and
dramatically improved thermal coupling provide an extremely stable device
temperature resulting in much improved linearity.
Pre-amplifier section
* All new audiophile pre-amplifier design with very
low noise and distortion
* Very short audio signal path for cleanest possible sound
* No tone controls for lowest distortion and noise
* DC coupled using servo to remove any DC from input signals
* New improved Burr Brown volume control
* High quality Burr Brown op-amps in signal path
* Four-layer printed circuit boards allow control of power supply reduction of
electrical noise
* Processor mode option for seamless integration with AV surround decoders
* Audiophile grade Stargate and Rubicon capacitors for signal transparency
* Optional single stage MM/MC phono preamp
Power amplifier features
* 105wpc continuous power output (8ohms, both
channels driven)
* 200wpc continuous power output (4ohms, 1kHz, one channel driven)
* Fully discrete transistor power amp stages with temperature compensation
* Current feedback design ensuring wide bandwidth for high resolution audio
* Two pairs of individually selectable gold plated speaker outputs
* All DC coupled signal path for enhanced bass control
* All new thermal management for exceptional sonic stability
Power supply features
* Massive toroid mains transformer
* User switchable between 115v and 230v mains supplies
* Dual rectified power amp supplies for reduced ground noise
* Separate smoothing per channel to reduce crosstalk
* Independently rectified and regulated pre-amp power supplies
General Features
* Supplied with CR90 system remote control
* Size - 430mm (17") wide, 370mm (14") deep, 110mm (4.2") high
* Weight 9.5kg (20.9lbs) net, 12.5kg (27.5lbs) packed
$2,799

The CD-17 offers astonishing
musical reproduction from CDs. The all important Digital to Analogue conversion
is carried out by the very latest Wolfson 8741 DAC driven by an extremely
accurate digital clock and audiophile grade supporting components.
Electromagnetic interference (EMI), which would normally
mask fine details in similar players, is dramatically reduced using Arcam's
proprietary "Mask of Silence" technology. The use of "Stealth
Mat" (unique metal fibre matting) further diffuses EMI to help reproduce
every nuance of each recording.
Digital to Analogue System
* Latest Wolfson 8741 DACs operating in
differential mode
* Output stage design derived from range topping FMJ AV9 processor
* High precision clock with individually buffered clock outputs
* Anti clipping processing to prevent distortion from CDs with very high output
level
Connectivity
* Two pairs of RCA phono outputs for multi room use
or direct recording
* Coax (phono) and optical (Toslink) digital outputs
Power supply
* Toroid main transformer
* Separate, high capacity power supplies for analogue, servo and digital
sections
* Each supply individually regulated
* Separate ground returns ("Star" earth) for each power supply to
prevent inter-stage noise
* Switchable mains power inlet 110-120v / 220-240v
General
* Supplied with CR10 system remote control
* Large, custom VFD display
* Size - 430mm (17") wide, 290mm (10.4") deep, 85mm (3.3") high
* Weight 5.1kg (11.2lbs) net, 7.0kg (15.4lbs) packed
$1,099



