Studio 20 v5
Design 2-driver, 2-way bookshelf / stand-mounted
Crossover(s) 2nd-order electro-acoustic at 2.0 kHz High-Frequency Driver(s) 25-mm (1 in) G-PAL™ dome, ferro-fluid damped / cooled, die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Bass / Midrange Driver(s) 178-mm (7 in) S-PAL™ cone, 38-mm (1-1/2 in) voice coil, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Low-Frequency Extension* 36 Hz (DIN)
Frequency Response:
On-Axis ±2 dB from 54 Hz - 22 kHz
30° Off-Axis ±2 dB from 54 Hz - 20 kHz
Sensitivity - Room / Anechoic 90 / 87 dB
Suitable Amplifier Power Range 15 - 180 watts
Maximum Input Power† 110 watts
Impedance Compatible with 8 ohms
Height, Width, Depth (Height includes spikes) 37.2 cm x 22.5 cm x 33.5 cm 14-5/8 in x 8-7/8 in x 13-3/16 in
$1399 pair
Studio 60 v5
Design 4-driver, 2-1/2-way floorstanding
Crossover(s) 2nd-order electro-acoustic at 2.0 kHz, 2nd-order electro-acoustic at 500 Hz (lower bass driver) High-Frequency Driver(s) 25-mm (1 in) G-PAL™ dome, ferro-fluid damped / cooled, die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Bass / Midrange Driver(s) 140-mm (5-1/2 in) S-PAL™ cone, 38-mm (1-1/2 in) voice coil, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Bass Driver(s) Two 140-mm (5-1/2 in) mineral-filled polypropylene cones, 38-mm (1-1/2 in) voice coil, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Low-Frequency Extension* 29 Hz (DIN)
Frequency Response:
On-Axis ±2 dB from 45 Hz - 22 kHz
30° Off-Axis ±2 dB from 45 Hz - 20 kHz
Sensitivity - Room / Anechoic 92 / 89 dB
Suitable Amplifier Power Range 15 - 220 watts
Maximum Input Power† 170 watts
Impedance Compatible with 8 ohms
Height, Width, Depth
(Height includes spikes or outrigger feet) 101.8 cm x 20.0 cm x 30.1 cm 40-1/16 in x 7-7/8 in x 11-7/8 in
$2399 pair
Studio 100 v5
Design 5 driver, 3-way floorstanding
Crossover(s) 3rd-order electro-acoustic at 2.0 kHz, 3rd-order electro-acoustic at 300 Hz (bass drivers) High-Frequency Driver(s) 25-mm (1 in) G-PAL™ dome, ferro-fluid damped / cooled, die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Midrange Driver(s) 178-mm (7 in) S-PAL™ cone, 38-mm (1-1/2 in) voice coil, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Bass Driver(s) Three 178-mm (7 in) mineral-filled polypropylene cones, 38-mm (1-1/2 in) voice coils, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Low-Frequency Extension* 25 Hz (DIN)
Frequency Response:
On-Axis ±2 dB from 44 Hz - 22 kHz
30° Off-Axis ±2 dB from 44 Hz - 20 kHz
Sensitivity - Room / Anechoic 93 dB / 90 dB
Suitable Amplifier Power Range 15 - 350 watts
Maximum Input Power† 230 watts
Impedance Compatible with 8 ohms
Height, Width, Depth (Height includes outrigger feet) 112.0 cm x 24.1 cm x 43.1 cm 44-1/8 in x 9-1/2 in x 16-15/16 in.
$3599 pair
Sub 12
Design Single high-excursion driver, patented built-in Ultra-Class-D™ power amplifier, sealed enclosure, USB port
Amplifier: High-Current, Discrete Output 3400 watts Dynamic Peak / 1700 watts RMS Sustained
Amplifier Design Features Auto-On/Off, Trigger-On/Off, soft clipping, thermal protection, electrical shorting protection
Bass Driver(s) 305-mm (12 in) RCR™ mineral-filled co-polymer polypropylene cone
Low-Frequency Extension* 16 Hz (DIN)
Subwoofer Cut-Off Frequency Variable 35 Hz - 150 Hz; Bypass option
Sub. / Sat. Phase Alignment Variable 0° - 180°
Frequency Response: ±
Level Input RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp/processor or other line-level source
Line-Level Input Sensitivity 100 mV Mono
Line-Level Input Impedance RCA: 10 k ohms; XLR: 20 k ohms;
Height, Width, Depth (Height includes outrigger feet) 44.3 cm x 40.7 cm x 54.6 cm 17-7/16 in x 16 in x 21-1/2 in
$2299
