Two Channel Amplifiers Tuners & Receivers


Anthem

Statement M1

Monaural Amplifier

The Statement M1 is a state-of-the-art monaural amplifier delivering 1,000 watts into 8 ohms and 2,000 watts into 4 ohms or less with THD remaining under 0.1%.

  • Cutting edge Technology and Design  
  • No compression as output increases
  • Output stage is never allowed to clip
  • Flat frequency response at any load
  • Extremely low noise floor
  • Product Specifications

$4,370


P2

2-channel, 325 watts continuous power into 8 Ohms

"The P2 rules … beautiful power … incisive … crisp and articulate … exceptionally neutral … delivering the subtleties, nuances and harmonic delicacies — without editorializing … seriously slamming bass … set to redefine the concept of value in the audiophile world.”

– Jason Thorpe, SoundStage!

$5,600


Statement A2 Amplifier

2-channel power amplifier; 225 watts per channel continuous power into 8 ohms.

“… phenomenal … completely transparent in their delivery … synergy between the Anthem amps and the speakers was incredible … effortless and very convincing … every nuance is presented wonderfully—at blistering levels … never showed any signs of running out of steam …”

– Kris Deering, Secrets of Home Theater and High Fidelity on the A2/A5

$3,100


PVA 2

2-channel power amplifier; 125 watts per channel continuous power into 8 ohms.

  • 26 lb (11.8 kg)
  • 5-7/8" (14.9 cm) High x 17-1/4" (43.8 cm) Wide x 13-1/4" (33.5 cm) Deep
  • Product specification

$1,799


P49

Stereo power amplifier

Drawing on the many years of amplifier design experience at Arcam, the P49 uses the best quality components and engineering practice to produce a product that will give many years of musical pleasure and reliable service.

With a class G amplifier, toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion and noise the P49 is capable of reproducing music with all its original authority and detail.  Rest assured you will be hearing the music just as the artist intended.

  • Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
  • Single, 4Ω, at 1kHz - 400W
  • Input nominal sensitivityfor 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
  • Input impedance - 10kΩ
  • Input Frequency response 20Hz-20kHz +/- 0.05dB
  •  Input Signal/noise ratio (Awtd) 50W / 8Ω - 110d
  •  W x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm
  •  Weight (net) - 18.0kg
  •  Product specification

$7,000


C49

Stereo pre-amplifier

Drawing on the many years of amplifier design experience at Arcam, the C49 uses the best quality components and engineering practice to produce a product that will give many years of musical pleasure and reliable service.

The C49 features dual mono volume controls and a balanced signal path all the way though the product together with distortion nulling input multiplexers. Rest assured you will be hearing the music just as the artist intended.

There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right to match them in the field of amplifier design. This ground breaking pre-amplifier is a must audition product for music lovers.

The C49 has been designed with system building flexibility in mind, allowing for the “ultimate” system of a C49 with six bridged P49s tri-amping the speakers.

Inputs - Phono (MM) cartridge

  • ·       Input sensitivity at 1kHz - 5mV
  • ·       Input impedance - 47kΩ +100pF
  • ·       Frequency response (ref. RIAA curve) - 20Hz-20kHz +/- 1dB
  • ·       Signal/noise ratio (Awtd) 50W, ref. 5mV input - 80dB
  • ·       Overload margin, 5mV at 1kHz - 20dB

Inputs

  • ·       Nominal sensitivity - 1V (RCA), 2V (XLR)
  • ·       Input impedance - 10kΩ
  • ·       Maximum input - 4.6V (RCA), 8.2V (XLR)
  • ·       Frequency response 20Hz-20kHz +/- 0.05dB
  • ·       Signal/noise ratio (Awtd) 50W, ref 1V input - 105dB

Preamplifier output

  • ·       Nominal output level - 1.15V (RCA), 2.3V (XLR)
  • ·       Output impedance - 47Ω (RCA), 200Ω (XLR)

Headphones output

  • ·       Maximum output level into 600Ω - 4Vrms
  • ·       Output impedance - 1Ω
  • ·       Load range - 16Ω-2kΩ

Dimensions & Weight

  • ·       W x D (inc. speaker terminals) x H (inc. feet) - 433 x 410 x 171mm
  • ·       Weight (net) - 8.7kg

·       Product specifications

$6,500


A49

Class G stereo integrated amplifier

Arcam’s A49 integrated amplifier represents the pinnacle of Arcam’s audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.

Featuring Class G circuit topology, the A49 can deliver pure 50 watts of Class A performance, yet it is able to produce a massive 200 watts into an 8Ω speaker or when connected to a 4Ω impedance speaker up to 400 watts of clean authoritative power. The A49 has an super short signal path eliminating insertion losses and utilizes a dual mono volume control eliminating cross talk. The attention to detail in this ground breaking amplifier design is unmatched.  The sonic results speak for themselves.

  • Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
  • Single, 4Ω, at 1kHz - 400W
  • Input nominal sensitivity - 1V (RCA), 2V (XLR)
  • Input impedance - 10kΩ
  • Phono Input impedance - 47kΩ +100p
  • Phono input frequency response (ref. RIAA curve) - 20Hz-20kHz +/- 1dB
  • Phono signal/noise ratio (Awtd) 50W, ref. 5mV input - 80dB
  • Phono overload margin, 5mV at 1kHz - 20dB
  • Nominal output level - 1.15V (RCA), 2.3V (XLR)
  • Output impedance - 47Ω (RCA), 200Ω (XLR)
  • Headphones outputMaximum output level into 600Ω - 4Vrms
  • Headphones outputOutput impedance - 1Ω
  • Headphones outputLoad range - 16Ω-2kΩ
  • W x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm
  • Weight (net) - 19.7kg
  • Product specifications

$8,500

  


A19

Integrated amplifier

  • Continuous power output (20Hz—20kHz at 0.5% THD), per channel
  • Both channels, 8Ω, 20Hz—20kHz: 50W]
  • Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
  • Phono (MM) cartridge
  • Line and AV inputs
  • Headphones Output
  • Dimensions W x D x H (including feet): 432 x 275 x 85mm
  • Weight (net): 8.5kg
  • Product specifications

$1,299 on display


A29

Arcam A29 Amplifier represents another major step forward for Arcam’s stereo audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.

With a class G amplifier, toroidal based power supply, acoustically damped chassis, complementary transistor output stages and exceptionally low levels of distortion and noise the Arcam A29 Amplifier is capable of reproducing music with all its original authority and detail. Rest assured you will be hearing the music just as the artist intended.

Integrated stereo amplifier

  • 80W Class G amplification
  • On board PSU for rSeries products
  • CR902 system remote control
  • Phono input configurable for line/MM
  • Large ergonomically designed aluminium knob
  • Low power 0.5W standby

$2,399


A39

Integrated amplifier

With a class G amplifier (up to 20W of Class A then up to 120W in Class G), toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion and noise the A39 is capable of reproducing music with all its original authority and detail. This beautifully designed British amplifier produces a smooth and musical performance with exceptional resolution combined with power and authority.  A class leader!

  • Continuous power output (20Hz—20kHz at 0.5% THD), per channel - Both channels, 8Ω, 20Hz—20kHz: 120W
  • Harmonic distortion, 80% power, 8Ω at 1kHz: 0.001
  • Dimensions W x D x H (including feet): 433 x 425 x 100mm
  • Weight (net): 11.5kg
  • Weight (packed): 13.2kg
  • Frequency response: 20Hz—20kHz ± 0.2dB
  • Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
  • Phono (MM) cartridge:
  • Product specification

$3,499 on display

 


AVR550

Arcam AVR550 Atmos Receiver

  • Dolby Atmos 7.1.4 decoding, DTS:X ready
  • 4K (UHD) HDMI2.0a with HDCP2.2
  • 7 HDMI inputs, 3 HDMI outputs, ARC compatible
  • Dirac Live® for Arcam room correction
  • Spotify® Connect enabled
  • 7 channel high performance amplifier on board
  • Class G power amplification (AVR850 only)
  • Ethernet, RS232 and IR control
  • Free MusicLife iOS UPnP and control app
  • Continuous power output, per channel, 8Ω
  • 2 channels driven, 20Hz ‑ 20kHz, <0.02% THD - 110W
  • 2 channels driven, 1kHz, 0.2% THD - 125W
  • 7 channels driven, 1kHz, 0.2% THD - 90W
  • Residual noise & hum (A-wtd) - <0.15mV

$5,000


SR250

Arcam SR250 2 ch. Receiver

  • 2-channel high-end audiophile AVR
  • 4K (UHD) HDMI2.0a with HDCP2.2
  • 7 HDMI inputs, 3 HDMI outputs, ARC compatible
  • Dirac Live® for Arcam room correction
  • Spotify® Connect enabled
  • Class G power amplification
  • On board PSU for rSeries accessories
  • Ethernet, RS232 and IR control
  • Free MusicLife iOS UPnP and control app
  • Continuous power output, per channel, 8Ω
  • 2 channels driven, 20Hz ‑ 20kHz, <0.02% THD - 90W
  • 2 channels driven, 1kHz, 0.2% THD - 120W
  • Residual noise & hum (A-wtd) - <0.15mV

$5,500


AVR850

Arcam AVR850 Atmos Receiver

  • Dolby Atmos 7.1.4 decoding, DTS:X ready
  • 4K (UHD) HDMI2.0a with HDCP2.2
  • 7 HDMI inputs, 3 HDMI outputs, ARC compatible
  • Dirac Live® for Arcam room correction
  • Spotify® Connect enabled
  • 7 channel high performance amplifier on board
  • Class G power amplification (AVR850 only)
  • Ethernet, RS232 and IR control
  • Free MusicLife iOS UPnP and control app
  • Continuous power output, per channel, 8Ω/4Ω
  • 2 channels driven, 20Hz ‑ 20kHz, <0.02% THD - 120W/200W
  • 2 channels driven, 1kHz, 0.2% THD - 130W/210W
  • 7 channels driven, 1kHz, 0.2% THD - 100W/180W
  • Residual noise & hum (A-wtd) - <0.15mV

$8,500


REF750SE

The Reference 750 SE redefines all expectations of what is possible from an amplifier in a music playback system. It is the culmination of everything Audio Research knows about amplifier design and manufacture – High Definition in its purest, most dynamic form.

  • POWER OUTPUT: 750 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 750 watts, below .04% at 1 watt. 
  • POWER BANDWIDTH: (-3dB points) 15Hz to 150kHz.
  • FREQUENCY RESPONSE: (-3dB points at 1 watt) 1 Hz to 200 kHz.
  • INPUT SENSITIVITY: 4.6V RMS Balanced for rated output. (24 dB gain into 8 ohms.)
  • INPUT IMPEDANCE: 200K ohms Balanced.
  • OUTPUT TAPS: 4, 8, 16 ohms.
  • OUTPUT REGULATION: Approximately 0.5dB 16 ohm load to open circuit (Damping factor approximately 17).
  • OVERALL NEGATIVE FEEDBACK: 13dB.
  • SLEW RATE: 20 volts/microsecond.
  • RISE TIME: 1.5 microseconds.
  • HUM & NOISE: Less than 0.2mV RMS – 110dB below rated output (IHF-A weighted, input shorted, 16 ohm output).
  • POWER SUPPLY ENERGY STORAGE: Approximately 1300 joules.
  • POWER REQUIREMENTS: 105-130VAC 60Hz (260-750VAC 50Hz) 2100 watts at rated output, 2400 watts maximum, 800 watts at "idle".
  • TUBES REQUIRED: 8 Matched pair KT150 Power Output; 1 6550WE Regulator; 1 6H30 Regulator Amplifier; 1 matched pair KT150 Driver; 1 6H30 follower.
  • DIMENSIONS: 13.5" (34.3 cm) W x 23" (58.4 cm) H x 20.8" (52.8 cm) D. Handles extend 1.5" (3.8 cm) forward and rearward.
  • WEIGHT: 170 lbs. (77.2 kg) Net; 395 lbs. (180 kg) per pair shipped weight.

$33,000 USD


  • REF250SE

The concept of a large monoblock amplifier is to provide control to a speaker.  The difficult part of the job is maintaining finesse and musicality while doing it.  Audio Research has produced some of the most critically acclaimed products during its 42-year history and the new Reference 250 SE aims to break new ground.

  • Power Bandwidth: (-3dB points) 5Hz to 70kHz
  • Frequency Response: (-3dB points at 1 watt) 0.5Hz to 110 kHz
  • Input Sensitivity: 2.4V RMS Balanced for rated output. (25.5 dB gain into 8 ohms)
  • Input Impedance: 200K ohms Balanced
  • Output Polarity: Non-inverting. Balanced input pin 2+ (IEC-268)
  • Output Taps: 16 ohms, 8 ohms, 4 ohms
  • Output Regulation: Approximately 0.9dB 16 ohm load to open circuit (Damping factor approximately 10)
  • Overall Negative Feedback: 8.8dB
  • Slew Rate: 20 volts/microsecond
  • Rise Time: 1.5 microseconds
  • Hum & Noise: Less than 0.2mV RMS – 110dB below rated output (IHF A-weighted, input shorted, 16 ohm output)
  • Power Supply Energy Storage: Approximately 900 joules
  • Power Requirements: 105-130VAC 60Hz (210- 250VAC 50Hz) 770 watts at rated output, 1000 watts maximum, 380 watts at “idle,” 1 watt off
  • Tubes required: 3 Matched pair KT150 (Power output V1-6); 1 Matched pair KT150 (Driver V7-8); 2 6H30 (Gain stage V9 and Regulator Driver V11); 1 6550C (Regulator V10)
  • Dimensions: width 19” (48.3 cm) height8.75” (22.2 cm) depth 19.5” (49.5 cm) Handles extend 1.5” (3.8 cm) forward
  • Weight: 47 lbs. (21.3 kg) Net 63 lbs. (28.6 kg) Shipping

$17,000 USD


REF150SE

Simply put, the REF150 SE is a breakthrough in stereo power amplification.  Replacing the REF150—which was one of the most respected modern stereo amplifiers—was a daunting task, but it has been accomplished.  The REF150 SE offers more power, greater dynamic thrust, a more vivid and resolved presentation, greater finesse, and quieter operation.  It is the new benchmark. Having identical outer dimensions as its predecessor, the REF150 SE has much more packed into its chassis.  Refined front-panel cosmetics reflect the updated look of current-generation models, with silver units having silver handles and silver top covers, while black units have black handles and black cover.  (Colors may be mixed to match older models.)

  • POWER OUTPUT: 150 watts per channel continuous from20Hz to 20kHz. 1kHz total harmonic distortion typically 0.6% at 150 watts, below 0.03% at 1 watt. 
  • POWER BANDWIDTH:(-3dB points) 5Hz to 80kHz. 
  • FREQUENCY RESPONSE: (-3dB points at 1 watt) 0.5Hz to 120 kHz.
  • INPUT SENSITIVITY: 2.0V RMS BAL for rated output. (24 dB Bal gain into 8 ohms.)
  • INPUT IMPEDANCE: 300K ohms Balanced. 
  • OUTPUT POLARITY: Non-inverting. Balanced input pin 2+ (IEC-268). 
  • OUTPUT TAPS: 16 ohms, 8 ohms, 4 ohms.
  • OUTPUT REGULATION: Approximately 0.6dB 16 ohm load to open circuit (Damping factor approximately 14). 
  • OVERALL NEGATIVE FEEDBACK: 14dB.
  • SLEW RATE: 13 volts/microsecond. 
  • RISE TIME: 2.0 microseconds. 
  • HUM & NOISE: Less than 0.1mV RMS – 114dB below rated output (IHF weighted, input shorted). 
  • POWER SUPPLY ENERGY STORAGE: Approximately 1040 joules.
  • POWER REQUIREMENTS: 105-125VAC 60Hz (210-250VAC 50Hz) 730 watts at rated output, 900 watts maximum, 420 watts idle.
  • TUBES REQUIRED: 2 – Matched quad KT150 – Power Output; 4 – 6H30 Driver.
  • DIMENSIONS: 19"(48.3cm) W x 83⁄4" (22.2cm) H x 191⁄2" (49.5cm) D. Handlesextend 11⁄2" (3.8cm) forward. 
  • WEIGHT: 75lbs. (34.2kg) Net; 90lbs. (41kg) Shipping.

$15,000 USD


REF75SE

The Reference 75 SE is a stunning amplifier in every way – performance, styling and reliability combined to elevate your music listening to a new experience.  Capable of controlling a wide variety of speakers, the Reference 75 SE will transport you into the musical performance unlike any other comparable amplifier. 

  • POWER OUTPUT: 75 watts per channel continuous from20Hz to 20kHz. 1kHz total harmonic distortion typically 0.6% at 75 watts, below 0.05% at 1 watt.
  • POWER BANDWIDTH: (-3dB points) 7Hz to 60kHz.
  • FREQUENCY RESPONSE:(-3dB points at 1 watt) 0.7Hz to 75 kHz.
  • INPUT SENSITIVITY: 1.4V RMS BAL for rated output. (25 dB Bal gain into 8 ohms.)
  • INPUT IMPEDANCE: 300K ohms Balanced.
  • OUTPUT POLARITY: Non-inverting. Balanced input pin 2+ (IEC-268).
  • OUTPUT TAPS: 8 ohms, 4 ohms.
  • OUTPUT REGULATION:Approximately 1.0dB 8 ohm load to open circuit (Damping factor approximately 8).
  • OVERALL NEGATIVE FEEDBACK: 15dB.
  • SLEW RATE: 10 volts/microsecond.
  • RISE TIME: 4.0 microseconds.
  • HUM & NOISE: Less than 0.06mV RMS – 112dB below rated output (IHF weighted, input shorted).
  • POWER SUPPLY ENERGY STORAGE: Approximately 520 joules.
  • POWER REQUIREMENTS: 105-125VAC 60Hz (210-250VAC 50Hz) 410 watts at rated output, 500 watts maximum, 230 watts idle.
  • TUBES REQUIRED: 2 – Matched pair KT150 – Power Output; 2 – 6H30 Driver.
  • DIMENSIONS: 19" (48.3 cm) W x 8.75" (22.2 cm) H x 19.5" (49.5 cm) D. Handles extend 1.5" (3.8 cm) forward.
  • WEIGHT: 47 lbs. (21.3 kg) Net; 63 lbs. (28.6 kg) Shipping.

$10,000 USD


REF10

The Reference 10 follows a new aesthetic path as well. It has a very modern and elegant finish that will attract new admirers without alienating fans of our older products.

  • FREQUENCY RESPONSE: +0 -3dB 0.1Hz to 200kHz at rated output. (BALANCED, 200k ohms load.)
  • DISTORTION: Less than .006% at 2V RMS Balanced output. 
  • GAIN: Main output (SE or BAL input)12dB Balanced output, 6dB Single Ended output. Tape output: 0dB. (Processor input: 0dB Balanced)
  • INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE, Inputs (7): 1, 2, 3, 4, 5, 6, PROCESSOR. (XLR and RCA connectors).
  • OUTPUT IMPEDANCE: 600 ohms Balanced, 300 ohms SE main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 main, 1 tape (XLR and RCA connectors).
  • OUTPUT POLARITY: Non inverting.
  • MAXIMUM INPUT: 20V RMS maximum Balanced, (10V RMS SE).
  • RATED OUTPUTS: 2V RMS (1V RMS SE) into 200K ohm balanced load (maximum balanced output capability is 30V RMS at less than 0.5% THD at 1kHz).
  • CROSSTALK: -80dB or better at 1kHz.
  • CONTROLS: Volume (104 steps). Push Buttons: Power, Mute, Interactive Touch Panel. Rear RS-232 control and IR input.
  • POWER SUPPLIES: Electronically regulated low and high voltage supplies. Automatic 40 sec. warm-up/brown-out mute. Line regulation better than .01%.
  • NOISE: 1.7uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (109dB below 2V RMS output.) 
  • TUBE COMPLEMENT: (8)-6H30P dual triodes, plus (2 each) 6550C and 6H30P in power supply.

$30,000 USD


REF6

Almost since the inception of the brand, Audio Research has produced some of the finest components for music reproduction; this is especially true with regard to preamplifiers. The Reference Series from Audio Research was first introduced in 1995 and has been the ultimate representation of performance, musicality and power. The Reference 6 is the latest chapter of the story. 

  • FREQUENCY RESPONSE: +0-3dB, 0.4Hz to 200kHz at rated output (Balanced, 200k ohms load). 
  • DISTORTION: Less than .01% at 2V RMS BAL output.
  • GAIN: Main output: 12dB Balanced output, 6dB SE output.  Record out: 0dB (Processor input: 0dB BAL output).
  • INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE.  Inputs: 4 balanced, 4 single-ended. Assignable processor passthrough.
  • OUTPUT IMPEDANCE: 600 ohms Balanced, 300 ohms SE Main (2). 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 main, 1 record out (XLR and RCA connectors).
  • OUTPUT POLARITY: Non-inverting.
  • MAXIMUM INPUT: 18V RMS BAL, 9V RMS SE.
  • RATED OUTPUTS: 2V RMS (1V RMS SE) into 200K ohm balanced load (maximum balanced output capability is 70V RMS at less than 0.5% THD at 1kHz).
  • CROSSTALK: -88dB or better at 1kHz and 10 kHz.
  • CONTROLS: otary encoders: Volume (103 steps), Select Input.  Push Buttons:  Power, Menu, Enter, Mono, Invert, Mute.
  • POWER SUPPLIES: Electronically regulated low and high voltage supplies.  Automatic 45 sec. warm-up/brown-out mute.  Line regulation better than .01%.
  • NOISE: 1.7uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (109dB below 2V RMS output.)
  • TUBE COMPLEMENT: (6)-6H30P dual triodes, plus (1 each) 6550WE and 6H30P in power supply.
  • POWER REQUIREMENTS: 100-135VAC 60Hz (200-250VAC 50/60Hz) 130 watts.  Standby: 2 watts.
  • DIMENSIONS: Width: 19” (48 cm), Height: 7.8” (19.8 cm), Depth: 16.5” (41.9 cm)

$14,000 USD


SP20

Influenced by some of our classic groundbreaking SP preamplifiers, the SP20 takes visual cues from past Audio Research products while incorporating our latest designs and technologies. The SP20 is a full-function line stage which incorporates a phono preamplifier and, for the first time ever on an Audio Research preamp, there is a ¼" headphone jack.

  • FREQUENCY RESPONSE: Line: +/- 3dB 2 Hz to 80 kHz; -3dB 0.8Hz to 220 kHz, Phono: +/- 0.1dB of RIAA 10Hz to 20kHz; +/- 0.4dB 5Hz to 80kHz, Headphone: +/- 0.05dB 20Hz to 20kHz; -3dB 0.8Hz to 220kHz
  • THD+N: Line: <.003% at 2V RMS, Bal output, Phono: <.005% at 3V RMS output, to Record output, Headphone: <.009% at 1V RMS output
  • GAIN: Line: 13.8dB, Processor: 0dB, Phono: 58dB @ 1KHz to Record output, Headphone: 11.3dB
  • NOISE: Line: <-101dBV volume at max, Phono: <-77dBV to Record output, Headphone: <-88dBV volume at max.
  • CHANNEL SEPARATION: Line: > 105dB Balanced output, Phono: >76dB to Record output, Headphone: >62dB
  • SIGNAL TO NOISE RATIO: Line: >125dB Balanced output, Phono: >94dB to Record output, Headphone: >110dB
  • RATED OUTPUTS: Line: 2V RMS (1V RMS SE) into 200k ohms balanced load (maximum balanced output capability is 18V RMS at less than .5% THD+N at 1kHz.).
    Phono: 0.5V RMS into 100k load at Record output (maximum output capability is 25V RMS). Headphone: 6V RMS maximum into 30 to 300 ohm load.
  • INPUT IMPEDANCE: 120k ohms Balanced, 60k ohms SE; Phono impedance programmable (100, 200, 500, 1000 or 47k ohms w/200pf unbalanced).
  • OUTPUT IMPEDANCE: 500 ohms Balanced, 250 ohms SE; 1000 ohms Record Out SE; <.05 ohms Headphone SE.
  • OUTPUT POLARITY: Non-inverting. 
  • MAXIMUM INPUT LINE:m19V RMS Balanced, 9V RMS SE. Phono: 70mV RMS at 1kHz.
  • CONTROLS: Rotary Volume (104 steps), Rotary Input selector. Push
  • BUTTONS: Power, Mute, SPKR Off. Interactive Touch Screen. Rear RS-232 control and Remote IR input.
  • POWER SUPPLIES: Electronically regulated low and high voltage supplies. Automatic 30 sec. warm-up/brown-out mute. Line regulation better than .01%. 
  • TUBE COMPLEMENT: 4 6H30 dual triode.
  • POWER REQUIREMENTS: 100 - 135VAC 60Hz (200 - 270VAC 50/60Hz) 77 watts maximum. Standby 2.7 watts.
  • DIMENSIONS: Width 19" (48 cm), Height 5.25"(13.4 cm), Depth 16.5"(42 cm)

$9,000 USD


LS28

The LS28 line stage is a flexible and intuitive preamplifier. Four balanced and four single-ended inputs, and two sets of both balanced and single-ended outputs, allow maximum connectivity. At the heart of the LS28 are four 6H30 vacuum tubes in the analog circuit. While the LS28 is the perfect match for any Audio Research amplifier, it has been designed to work with nearly any amplifier on the market today.

  • FREQUENCY RESPONSE: +0-3dB, 0.4Hz to 200kHz at rated output (Balanced, 200k ohms load)
  • THD+NOISE: Less than .007% at 2V RMS BAL output.
  • NOISE: Less than -100dBv at max volume (103).
  • DYNAMIC RANGE: 122dB (AES17).
  • CROSSTALK: -105dB
  • GAIN: Main output: 18.7dB balanced output. (9.3dB SE output.)  Record output: 0dB (Processor input: 0dB balanced out).
  • INPUT IMPEDANCE: 100K ohms Balanced, 50K ohms SE. 8 Inputs - 4 balanced, 4 single-ended.
  • OUTPUT IMPEDANCE: 600 ohms Balanced, 300 ohms SE Main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 Main, 1 Record (XLR and RCA connectors).
  • OUTPUT POLARITY: on-inverting.
  • MAXIMUM INPUT: 16V RMS BAL, 8V RMS SE.
  • RATED OUTPUTS: 2V RMS (1V RMS SE) 1Hz to 200kHz into 200K ohm balanced load (maximum balanced output capability is 17V RMS at less than 0.5% THD at 1kHz).
  • CONTROLS: Rotary volume selector (103 steps) and rotary input selector. Push buttons: Power, Menu, Enter, Mono, Invert, Mute
  • POWER SUPPLIES: Electronically regulated low and high voltage supplies.  Automatic 45 sec. warm-up/brown-out mute.  Line regulation better than .01%.
  • TUBE COMPLEMENT: (4) 6H30P dual triode.
  • POWER REQUIREMENTS: 105-125VAC 60Hz (200-250VAC 50/60Hz) 130 watts maximum.
  • STANDBY: 2W

$7,500 USD


Mono X 300 Signature

Mono power amplifier

Cyrus's best mono power amplifier, with huge power and capacity.

The Mono X 300 Signature incorporates a huge amount of power to provide great amplification, with Cyrus's Zero Feedback technology. This means that the sound coming out of the amp is exactly the same as the one going in – just bigger!

The Mono X 300 Signature can provide an enormous 225 watts of power to your speakers (through 8 Ohms).

Inside, the amplification processes have been expertly engineered to produce zero feedback, with a sophisticated complex circuitry making sure that the output signal is powerful and precise.

  • Inputs – RCA phono or XLR balanced
  • Outputs – BFA terminals, RCA chain out
  • Power supply – 305VA Toroidal transformer
  • Power output - 225W into 8 ohms; 365W into 4 ohms
  • Dimensions (H x W x D) – 73 x 215 x 360 mm
  • Weight – 6.4kg

$5,899.00


Stereo 200

Stereo power amplifier

Stereo 200 is a high performance power amplifier incorporating a new and unique Cyrus topology that combines the benefits of high efficiency and lower heat generation from a digital output stage, with our highly refined analogue power supply design. Delivering a herculean 2 x 200 watts into 6 Ω from the single ½ width Cyrus die-cast aluminium chassis, this amplifier is intended to fit in the range between the X Power and the Mono X 200 Signature.

A new 200 watts per channel stereo power amplifier using a unique hybrid design, this high quality power amp provides immense power from a very compact chassis. An ideal match with Stream XP or Pre DAC models.

  • Inputs – RCA phono or XLR balanced, 12V trigger
  • Outputs – 4mm/spade/bare wire loudspeaker terminals, RCA chain out
  • Power supply – 475VA Toroidal transformer
  • Output power (continuous @ 0.1% THD+N) 8 ohms - 175 Watts, 4 ohms - 325 Watts
  • Dimensions (H x W x D) – 73 x 215 x 360 mm
  • Weight – 6.9kg

$3,799.00


X Power

Stereo or Mono power amplifier

High quality amplifier, switchable stereo or mono modes with huge amounts of power.

The X Power can be used for stereo amplification, delivering up to 70 watts per channel (into 8 Ohms) to two speakers, or switched to mono and used with another X Power to provide up to 140 watts (into 8 Ohms) to each speaker.

This high quality amplifier is a great example of our upgrade philosophy, providing you with excellent stereo amplification as well as the opportunity to improve the sound in the future by adding a second X Power.

The X Power uses an oversized power supply, which allows it to be incredibly dynamic and responsive to even the most challenging inputs. These huge power reserves will be channelled into your music whether being used in stereo or mono mode.

To make sure all of that power is put to good use, every single component - from the die cast chassis down to each power filter, has been selected through a careful testing process to find the combination which provides our trademark sound quality.

The PSX-R takes the X Power to another level of power amplification. By powering the audio output stages and separating control and audio signal power supplies the PSX-R boosts the finesse of the X Power, translating into even smoother treble and mid-range performance and a faster weightier bass.

With a PSX-R, an X Power can provide up to 120 watts (stereo) or 240 watts (mono) per channel (into 4 Ohms).

  • Inputs – 2 RCA
  • Outputs – Bi-wirable loudspeakers, RCA chain out
  • Power supply - 330VA Toroidal transformer
  • Stereo power output - 70W/channel into 8 Ohms; 110W/channel into 4 Ohms
  • Mono power output - 140W/channel into 8 Ohms; 195W/channel into 4 Ohms
  • Dimensions (H x W x D) – 73 x 215 x 360 mm
  • Weight – 4.1kg

$2,249.00


8₂ DAC

DAC/Integrated amplifier

The 8₂ DAC is our most flexible integrated amplifier. A high quality and scalable design provides an impressive 88 Watts per channel, and includes six analogue inputs which you can individually name from a list of options in the set up wizard. Also included is a great headphone facility and twin speaker output for bi-wiring.

  • Stereo RCA analogue: 1 pair fixed, 2 pairs variable
  • BFA speaker: Yes
  • Headphones: Yes
  • PSX-R upgrade port: Yes
  • MC-BUS: Yes
  • Optical SPDIF: 2
  • Coaxial SPDIF: 2
  • USB B: 1
  • Analogue RCA Phono: 6 pairs
  • Maximum signal resolution: 24-bit/192kHz
  • Watts into 6 Ohms: 88

$3,399.00 - 8₂ DAC


6 DAC

DAC/Integrated amplifier

Award winning high quality amplifier and digital to analogue converter.

The amplifying section of the Cyrus 6 DAC comes from the Cyrus 6a, our award winning high quality amplifier. Its built-in digital to analogue converter reads the highest 24-bit files and transforms them into the music your speakers love in high definition.

As well as including the Cyrus 6 DAC in your hi-fi system, you can use it to play music directly from your computer or plug it into your TV or satellite box.

This high quality amplifier and DAC will put new life into your music or films with a touch of our trademark Cyrus tuning.

  • Inputs – 6 analogue, 2 electrical SPDIF, 2 optical SPDIF, 1 USB (computer slave)
  • Sample rate compatibility – digital input: 24-bit/192kHz; USB: 16-bit/48kHz
  • Outputs – Zone 2, preamp out, headphone, bi-wire loudspeakers
  • Power supply – 130VA transformer
  • Power output – 50W per channel into 4 ohms; 40W per channel into 8 ohms
  • Dimensions (H x W x D) – 73 x 215 x 360 mm
  • Weight – 5g

$2,249 - 6 DAC


Momentum M400 mono block amplifier

Mono power amplifier

The new M400 moniker gives clue to a major part of the upgrade. Power output has been increased to 400 Watts. This is up from the original 300 Watts. The backbone of the power increase is a new ultra-quiet 1,800VA linear transformer - a 20% increase in size from the original. Coupled to this larger power source is a new output stage design that includes a number of major enhancements.

A critical element of any amplifier output stage is circuitry known as the driver section. In the new Momentum M400, this stage has been elevated to a fully complementary design. There are now individual transistors employed for the positive and negative halves of the musical signal. This change nearly doubles the current drive necessary to maximize the enhanced output stage that follows. The new output stage takes this increased drive to boost the open loop gain by the same factor of two. The result is a sound that is more authoritative, richer, and more expansive.

  • Power: 400 watts @ 8Ω, 800 watts @ 4Ω, 1,600 watts @ 2Ω
  • Frequency Response: 1 Hz to 200 kHz, -1 dB, 20Hz to 20 kHz, ±0.1 dB
  • Distortion: 400 watts @ 8Ω, 0.1% @ 1 kHz
  • Signal-to-Noise Ratio: 105 dB, unweighted
  • Inputs: 1 balanced XLR
  • Input Impedance: 1 MΩ
  • Output Impedance: 0.12Ω
  • Dimensions: 12.5 x 21.5 x 5.25 in. 95 lbs.

Starting at $65,000 USD a pair black/silver


Momentum stereo amplifier

Stereo power amplifer

The Momentum S250 stereo amplifier delivers the extraordinary sound quality of the Momentum M400 monoblock in a more affordable stereo design. The circuit topology and construction of the stereo amplifier mirror those of the monoblock, using the same ultra-efficient copper heat sinks with venturi cooling, the same 1% metal-film resistors, the same 69 MHz output transistors and the same fully complementary balanced configuration. The result is audio fidelity equaled by no other amplifier—except, of course, the Momentum M400 monoblock itself—and an efficient design that consumes less than 1 watt of power at standby. 

The new Momentum S250 stereo amplifier receives a power upgrade, now delivering 250 Watts/channel into 8 Ohms. This is up from the original 200 Watt/channel specification. A 20% increase in transformer size, up to 1,800VA, provides the engine for this output power increase. Connected to this larger power source is a new output stage design that includes a number of major enhancements.

  • Power: 250 watts @ 8Ω
    500 watts @ 4Ω
  • Frequency Response 1 Hz to 200 kHz, -1 dB
    20Hz to 20 kHz, ±0.1 dB
  • Distortion 250 watts @ 8Ω
    0.1% @ 1 kHz
  • Signal-to-Noise Ratio 105 dB, unweighted
  • Inputs 2 balanced XLR
  • Input Impedance 1 MΩ
  • Output Impedance 0.12Ω
  • Dimensions 5 x 12.5 x 21 in. (hwd)

Starting at $35,000 USD in Black/Silver


Momentum Pre Amplifier

Stereo preamplifier

Only the Momentum preamplifier can deliver the sound quality necessary to get the maximum possible performance from the Momentum monoblock and stereo amps.

Like the Momentum amplifiers, the preamplifier uses complementary balanced circuit topology for maximum bandwidth and low noise. Its audio circuitry is fully discrete, with no op amps. Zero-feedback design assures the most musical sound quality. Volume adjustment is made through a resistor ladder governed by an optical controller—the cleanest, most transparent possible method of controlling volume.

A 300 VA power supply in a separate chassis isolates the preamp’s sensitive circuitry from electromagnetic interference and noise. Separate supplies power audio and control circuitry, so the control circuits are completely isolated from the audio circuits.

The styling of the Momentum preamp perfectly complements the Momentum amplifiers, with copper accents to match the amplifiers’ unique copper heat sinks. The meter on the front face of the preamp indicates the volume setting, and a ring around the meter controls the volume. The front selector buttons illuminate to show which input is active. A radio-frequency (RF) remote control that works through walls is included.

Just like the Momentum amplifiers, the preamp uses through-hole construction and is hand-built and individually tested in D’Agostino’s Arizona facility. 

  • Inputs - 6 inputs, with theatre through put
  • Outputs - 2 output
  • Input Impedance - 1 MΩ
  • Output Impedance - 10Ω
  • Dimensions, preamp - 18 x 12.5 x 7 in.
  • Owner Manual

Starting at $35,000 USD in black


Momentum Integrated Amplifier

Stereo integrated amplifier

Until now, choosing an integrated amplifier always meant choosing compromise. But that's because until now, no integrated amplifier has ever borne the signature of Dan D'Agostino. The new Momentum integrated amplifier combines the core audio circuits of the Momentum preamplifier and the Momentum stereo amplifier, both of which have been acclaimed by respected reviewers around the world as among the best audio components every created.

The front panel has the same look and functionality as the Momentum preamplifier, with an illuminated dial and indicator needles inspired by classic Swiss watches. Six balanced XLR inputs are provided on the back panel. By-passable tone controls allow the listener to customize the sound to suit the recording or personal taste, without affecting the fundamental -sound quality and musicality of the unit.

The amplifier section is conservatively rated at 200 watts per channel into 8 ohms and 400 watts per channel into 4 ohms. A completely separate power supply, encased in a chassis machined from solid aluminum billet, isolates the sensitive audio circuitry from electromagnetic interference.

The Momentum integrated amplifier is an audio first: an integrated amplifier without compromise.

  • Power - 200 watts @ 8Ω, 400 watts @ 4Ω, 800 watts @ 2Ω
  • Frequency Response - 0.1 Hz to 200 kHz, -1 dB, 20Hz to 20 kHz, ±0 dB
  • Distortion - 200 watts @ 8 Ω < 0.1%, 20 Hz to 20 kHz
  • Signal-to-Noise Ratio - 95 dB, unweighted
  • Inputs - 6 stereo balanced XLR
  • Input Impedance - 1 MΩ
  • Output Impedance - 0.12Ω
  • Dimensions - 8 x 18 x 16 inches, 120 lbs. (with power supply)

Starting at $45,000 USD in black/silver


130 Pro

The Expert 130 Pro represents the most beautiful gateway into the audiophile world. It loads all Devialet exclusive technologies as well as major innovations developed for the new Expert Pro range, including distortion performance multiplied by 2 in stereo and an architecture designed to develop towards new uses.

  • Stereo · 2x130Watts 6Ω
  • THD+N : 0,0005% (130W / 6Ω)
  • THD : 0,00025% (10W / 6Ω)
  • Signal-to-Noise ratio: 130dB
  • New ADH Intelligence®
  • USB Audio 2.0 asynchronous input/output
  • 4 Configurable RCAs including MM/MC phono stage
  • New Magic Wire® DAC
  • RF omnidirectionnel remote control
  • Length: 383mm | Width: 383mm | Height: 40mm

$9,995


220 Pro

The best Stereo, the first step towards Dual-Mono.

The Expert Pro 220 is designed to meet the demanding needs of audiophiles with full connectivity and the world's most advanced phono stage. It loads all Devialet exclusive technologies as well as major innovations developed for the new Expert Pro range. Able to be linked to a second device to create an Expert 440 Pro, the Expert 220 Pro is the best solution to develop towards the extreme performance of the Dual-Mono configuration.

  • Stereo · 2x220Watts 6Ω
  • THD+N : 0,0005% (220W / 6Ω)
  • THD : 0,00025% (10W / 6Ω)
  • Signal-to-Noise ratio: 130dB
  • Advanced Phono stage
  • 6 Configurable RCAs including advanced MM/MC phono stage
  • Asynchronous USB Audio 2.0 input/output
  • New ADH Intelligence®
  • New Magic Wire® DAC
  • 383mm x 383mm x 40mm

$13,995


 440 Pro

Exceptional architecture and performance.

The Dual-Mono Expert Pro configuration is able to achieve new heights in performance, in particular with a distortion divided by 2 compared to the stereo system, more power for each channel and an extreme variety of connectors for the most demanding acoustic architectures.

The Expert 440 Pro loads all Devialet exclusive technologies as well as major innovations developed for the new Expert Pro range.

  • Dual-Mono · 2x440Watts 6Ω
  • THD+N : 0,00025% (440W / 6Ω)
  • THD : 0,0001% (10W / 6Ω)
  • Signal-to-Noise ratio: 133dB
  • Advanced Phono stage
  • New ADH Intelligence®
  • Universal Wi-Fi Streamer built-in 2.4GHz 802.11 b/g/n
  • 10 Configurable RCAs including advanced MM/MC phono
  • Asynchronous USB Audio 2.0 input/output
  • iOS / Android remote application
  • 383mm x 383mm x 80mm

$24,495


1000 Pro

 

The new Devialet’s audiophile icon.

The Expert 1000 Pro is the ultimate model of the Expert Pro range with 1000W of power at the service of music. This system of excellence is capable of driving the most demanding loudspeakers and achieving the best results with the lowest level of distortion in the world, even at full power. A unique base plate in solid copper weighing 2.4kg is what guarantees a completely controlled thermal management. The Expert 1000 Pro loads all Devialet exclusive technologies as well as major innovations developed for the new Expert Pro range.

  • Dual-Mono · 2x1000Watts 6Ω
  • THD+N : 0,00025% (1000W / 6Ω)
  • THD : 0,0001% (10W / 6Ω)
  • Signal-to-Noise ratio: 133dB
  • Advanced Phono stage
  • New ADH Intelligence®
  • New Magic Wire® DAC
  • Universal Wi-Fi Streamer built-in 2.4GHz 802.11 b/g/n
  • AES/EBU Digital Input
  • 10 Configurable RCAs including advanced MM/MC phono stage
  • Asynchronous USB Audio 2.0 input/output
  • Ethernet / RJ45 10 /100 Mbps 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
  • iOS / Android remote application
  • Length: 400mm|Width:  400mm|Height: 40mm

$44,995

 

888

Monaural power amplifier

The cumulation of technical expertise, combined with passion and a relentless pursuit for perfection has led to the creation of the MOON 888. This isn’t just another monoblock amplifier. It’s a statement. It is a concept taken to the extreme in every detail. The impressive power output is actually very modestly rated at a “mere” 1.2hp (888 watts). This is backed by a gargantuan power supply that coupled with an 8kW capacity output section on enormous cast-aluminum heatsinks can drive any load with complete effortlessness.

  • Output Power at 8Ω 888 Watts (1.2HP)
  • Output Power at 4Ω 1776 Watts (2.4HP)
  • Input Sensitivity 2.4V RMS
  • Input Impedance 24KΩ
  • Gain 31dB
  • Signal-to-noise Ratio 120dB @ full power
  • Frequency response (full range) 10Hz - 200kHz +0/-3.0dB THD (20Hz - 20kHz @ full power)
  • 0.04% Intermodulation distortion 0.006%
  • Shipping weight 300 lbs / 136 kgs
  • Dimensions (width x height x depth) 22 x 14 x 27 in. 55.9 x 35.6 x 68.6 cm.

Product specifications

 

$TBA

 


880M

Mono power amplifier

The MOON 880M Power Amplifier is a fully balanced differential mono design with both exceptional transparency and remarkable soundstage, despite its mammoth output power rating. Ultimately, the 880M will mate seamlessly with any loudspeaker, allowing it to reach its full sonic potential, regardless of its load.

  • Output Power at 8Ω 800 Watts per channel
  • Output Power at 4Ω 1600 Watts per channel
  • Input Sensitivity 2250mV RMS
  • Input Impedance 47,500Ω 
  • Gain 31dB
  • Signal-to-noise Ratio 106dB @ full power
  • Frequency response (full range) 10Hz - 200kHz +0/-3.0dB
  • THD (20Hz - 20kHz @ 1 watt / 800 watts) 0.015% / 0.04%
  • Intermodulation distortion 0.006%
  • Shipping weight 150 lbs / 67 Kgs
  • Dimensions (width x height x depth) (18.75 x 7.5 x 17.5 in.) (47.6 x 19.2 x 44.5 cm.) 

product specification

$25,000.00 each

 


870A

Dual mono power amplifier

  • Lynx Circuitry results in zero overall feedback resulting in zero intermodulation distortion or any common phase errors, which in turn produces a temporarily correct signal
  • Custom proprietary toroidal transformer resulting in low noise and spectacular dynamics
  • Dual mono Power supply
  • High damping factor insuring total control on the speaker
  • Capacitor free super short signal path reducing insertion loss to almost a negligible amount
  • Stable to any known speaker impedance
  • Ultra rigid chassis
  • Extremely close tolerances both electronically and mechanically - built like a fine chronograph
  • Output Power at 8Ω / 4Ω 300W/ch / 600 W/c h
  • Output Power - Bridged Mono 1200 Watts
  • Input Sensitivity, 1400mV RMS
  • Input Impedance,47,500Ω
  • Maximum current output, 72 amperes
  • Signal-to-noise Ratio,> 106dB @ full power
  • Frequency response (full range) 10Hz - 200kHz (+0/-3dB)
  • Crosstalk @ 1kHz - 105dB THD (20Hz - 20kHz @ 300 watts) < 0.04%
  • Intermodulation distortion, immeasurable
  • Shipping weight,98 lbs / 44 Kgs
  • Dimensions (width x height x depth), 18.75 x 7.5 x 17.5 in. 47.6 x 19.1 x 44.5 cm
  • available in Silver, Black, Silver/Black and special edition finishes

product specifications

$24,000.00 each


860A

Dual mono power amplifier

The MOON 860A Power Amplifier is a balanced differential dual-mono design with both exceptional transparency and
remarkable soundstage, despite its immense output power rating. Ultimately, the 860A will mate seamlessly with any loudspeaker, allowing it to reach its full sonic potential, regardless of its load.

  • Output Power at 8Ω / 4Ω,200W/ch / 400W/c h
  • Output Power - Bridged Mono,800 Watts
  • Input Sensitivity,1100mV RMS
  • Input Impedance,47,500Ω
  • Maximum current output,48 amperes
  • Signal-to-noise Ratio> 106dB @ full power
  • Frequency response (full range),10Hz - 200kHz (+0/-3dB)
  • Crosstalk @ 1kHz,- 105dB
  • THD (20Hz - 20kHz @ 200 watts),< 0.04%
  • Intermodulation distortion, immeasurable
  • Shipping weight, 90 lbs / 40 Kgs
  • Dimensions (width x height x depth) 18.75 x 7.5 x 17.5 in., 47.6 x 19.1 x 44.5 cm
  • available in Silver, Black, Silver/Black and special edition finishes

Product Specification

$16,000.00 each

 


760A

Dual mono power amplifier

The760A is the first amplifier to be housed in the slim Evolution series chassis, making it unusually compact, yet very heavy. A dual-mono, class A/B design with balanced differential circuitry, it exhibits all the sonic hallmarks which MOON products are globally known for an airy, detailed and open top end, transparent and 3-dimensional in the midrange, robust, powerful and authoritative in the bass. In a nutshell, the760A will amplify music with all the harmonic accuracy, richness and dimensionality of a live musical performance.

  • Output Power at 8Ω / 4Ω, 130W/ch / 260 W/c h
  • Output Power - Bridged Mono, 500 Watts
  • Input Sensitivity, 900mV RMS
  • Input Impedance, 47,500Ω
  • Maximum current output, 32 amperes
  • Signal-to-noise Ratio,104dB @ full power
  • Frequency response (full range),10Hz - 200kHz (+0/-3dB)
  • THD (20Hz - 20kHz @ 130 watts), < 0.04%
  • Intermodulation distortion, immeasurable
  • Shipping weight,45 lbs / 20 Kgs
  • Dimensions (width x height x depth)18.75 x 4.0 x 18.1 in.,47.6 x 10.2 x 46.0 cm.
  • available in Silver, Black, Silver/Black and special edition finishes

product specifications

 $8,500.00 each

 


700i

Dual Mono integrated amplifier

The MOON 700i is the ultimate Integrated Amplifier. Intended to meet the needs of the most demanding music connoisseurs, it is fully differential dual-mono design offering authority, finesse and superb control. Using a variety of new technologies developed since the introduction of the Evolution Series, the 700i provides more sonic transparency and accuracy than previously thought possible. In addition, this integrated offers extreme flexibility while exuding a luxurious presence in any environment

  • Output Power at 8Ω /4Ω, 175 /350 Watts per ch. 
  • Input Sensitivity 490mV - 6.0V RMS
  • Inputs (RCA / XLR) 4 Pairs / 1 Pair
  • Monitor Loop (RCA)1 pair
  • Damping Factor> 400
  • Gain 37dB
  • Maximum current output42 amperes
  • Frequency response (full range) 10Hz - 100kHz +0/-0.1dB
  • Crosstalk @ 1kHz -100dB
  • THD (20Hz - 20kHz @ 1 watt)< 0.015%
  • THD (20Hz - 20kHz @ 175 watts) < 0.04%
  • Intermodulation distortion, immeasurable
  • Shipping weight, 60 lbs / 27 Kgs
  • Dimensions (width x height x depth), 18.75 x 5.5 x 18.1 in., 47.6 x 14.0 x 46.0 cm.
  • available in Silver, Black, Silver/Black and special edition finishes

Product dimensions

$16,000.00 each

 


600i

Dual Mono Integrated amplifier

The MOON 600i Integrated Amplifier is designed to continue where the legendary and award winning MOON i-7 left off. . Intended to
meet the needs of the most demanding music connoisseurs, it is a fully differential dual-mono design, offering authority, finesse and superb control. Using a variety of new technologies developed since the introduction of the Evolution
Series, the 600i provides more sonic transparency and accuracy than ever before.

  • Output Power at 8Ω, 125 Watts per channel
  • Output Power at 4Ω, 250 Watts per channel
  • Input Sensitivity, 490mV - 6.0V RMS
  • Inputs (RCA / XLR), 4 Pairs / 1 Pair
  • Damping Factor > 267
  • Gain 37dB
  • Maximum current output 30 amperes
  • Frequency response (full range) 10Hz - 100kHz +0/-0.1dB
  • Crosstalk @ 1kHz -100dB
  • THD (20Hz - 20kHz @ 1 watt) < 0.015%
  • THD (20Hz - 20kHz @ 125 watts) < 0.04%
  • Intermodulation distortion immeasurable
  • Shipping weight 48 lbs / 21 Kgs
  • Dimensions (width x height x depth) 18.75 x 4.0 x 18.1 in, 47.6 x 10.2 x 46.0 cm
  • available in Silver, Black, Silver/Black and special edition finishes

Product Specifications

$9,500.00 each


850P

Dual mono reference pre amplifier

The 850P is the most advanced MOON preamplifier to date.  Extensive research and development, coupled with recent
advancements in electronic parts have provided us with  the foundation to design what may very well be the transparent, quietest, most accurate and uncoloured preamplifier.  Targeted to the discerning listener who desires uncompromising musical reproduction, the 850P features numerous proprietary technologies.

  • Circuit Topology,Open loop
  • Input Sensitivity, 200mV - 4.0V RMS
  • Input impedance, 11,000Ω
  • Gain,  9dB
  • Max. output voltage (XLR / RCA) 15V/ 7. 5 V
  • Signal-to-noise Ratio (20Hz-20kHz) 130dB @ full output
  • Frequency response (full range) 5Hz - 100kHz ±0.1dB
  • Crosstalk @ 1kHz, -130dB
  • Output impedance 50Ω
  • THD (20Hz-20kHz)< 0.0005%
  • Intermodulation distortion, immeasurable
  • Shipping weight 151 lbs / 67 Kgs
  • Dimensions - Preamplifier (W x H x D) 18.75 x 4.0 x 16.5 in.
  • Dimensions - Controller (W x H x D) 18.75 x 5.5 x 16.5 in
  • available in Silver, Black, Silver/Black and special edition finishes

product specification

$35,000.00 each


740P

Dual mono fully balanced pre amplifier

The 740P is a dual-mono fully balanced differential design, following in the footsteps of the reference 850P pre amplifer. This “next generation” Evolution series preamplifier uses various recently in-house developed technologies that help create a level of performance that can be best described as astounding.

  • Circuit TopologyOpen loop
  • Input Sensitivity 200mV - 4.0V RMS
  • Input impedance 22,000Ω
  • Gain 9dB
  • Max. output voltage (XLR / RCA) 12V / 6V
  • Signal-to-noise Ratio (20Hz-20kHz) 120dB @ full output
  • Frequency response (full range) 5Hz - 100kHz ±0.1dB
  • Crosstalk @ 1kHz -116dB
  • Output impedance 50Ω
  • THD (20Hz-20kHz)< 0.001%
  • Intermodulation distortion, Immeasurable
  • Shipping weight 35 lbs / 16 Kgs
  • Dimensions (width x height x depth) 18.75 x 4.0 x 16.5 in.,47.6 x 10.2 x 41.9 cm
  • Product specification

$9,500.00 each (on display)


400M

Fully mono balanced design

Extremely powerful, yet with a delicacy and articulation of the best amplifiers out there, the Neo 400M can take on virtually any loudspeaker you connect it to. Delivering a bottom-end slam with authority and weight to the foundation of the music, it will transport you into a live concert environment. On the top end of the musical spectrum, the Nēo 400M delivers finesse, detail and refinement that can challenge your perception of reality vs. recorded music.

  • Output Power at 8Ω, 400 Watts
  • Output Power at 4Ω, 650 Watts
  • Input Sensitivity, 800mV RMS
  • Input Impedance, 47,000Ω
  • Damping Factor > 800
  • Maximum current output 56 Amperes
  • Maximum output voltage 70 Volts
  • Signal-to-noise Ratio 106dB @ full power
  • Frequency response (full range)10Hz - 125kHz +0/-3dB
  • THD (20Hz - 20kHz @ 1 watt< 0.02%
  • THD (20Hz - 20kHz @ 400 watts< 0.05%
  • Intermodulation distortion, Immeasurable
  • Shipping weight, 33 lbs / 15 Kgs
  • Dimensions (width x height x depth),16.9 x 3.5 x 14.0 in., 42.9 x 8.9 x 37.6 cm
  • Product specification

$4,500.00 each


330A

Stereo power amplifier

Bred directly from the Evolution Series, the Nēo 330A represents not only an amazing value, but also amazing sound, period. It delivers a tight, extended and superbly authorative bass with power, weight and articulation. Vocals and cymbals float in a musical space filled with the air and natural ambience of a musical performance. When mated with the Nēo 350P Preamplifier, the combination provides a musical performance so complete and satisfying that one wonders if it can get any better. 

  • Output Power at 8Ω 125 Watts per channel
  • Output Power at 4Ω 250 Watts per channel
  • Output Power Bridged Mono at 8Ω 400 Watts
  • Input Sensitivity 800mV RMS
  • Input Impedance 47,000Ω
  • Damping Factor  > 400 Maximum
  • current output28 Amperes
  • Maximum output voltage40 Volts
  • Signal-to-noise Ratio 100dB @ full power
  • Frequency response (full range)10Hz - 125kHz +0/-3dB
  • THD (20Hz - 20kHz @ 1 watt) < 0.02% THD (20Hz - 20kHz @ 100 watts) < 0.05%
  • Intermodulation distortion, immeasurable
  • Shipping weight 33 lbs / 15 Kgs
  • Dimensions (width x height x depth)  16.9 x 3.5 x 14.0 in, 42.9 x 8.9 x 37.6 cm.
  • Product specification

$4,400.00 each

 


moonneo340ib_1.jpg

340i

Integrated amplifier

  • Output Power at 8Ω100 Watts per channel
  • Output Power at 4Ω  200 Watts per channel
  • Input Sensitivity  400mV - 3.0V RMS
  • Damping Factor  > 200
  • Gain 37dB
  • Signal-to-noise Ratio . > 110dB @ full power
  • Frequency response (full range) 2Hz - 90kHz +0/-3dB
  • Crosstalk .-88dB THD (20Hz - 20kHz @ 1 watt) < 0.015%
  • THD (20Hz - 20kHz @ 100 watts). < 0.05%
  • Intermodulation distortion  < 0.03%
  • Optional Digital Inputs S/PDIF, USB, Optical
  • Optional Digital Inputs Max. Resolution  24-bit / 192kHz
  • Shipping weight28 lbs / 13 Kgs
  • Dimensions (width x height x depth)16.9 x 3.5 x 14.8 in. 42.9 x 8.9 x 37.6 cm

product specification

340i $4,950.00 each

340i D3PX $5,900.00 each - DSD64/128/256, MM/MC Phono stage, balanced input

 


Ace

Featuring our MiND (MOON intelligent Network Device) module which provides convenience and a full graphic interface, allowing you to effortlessly access your digital music library with power and flexibility; Add TIDAL and an unlimited world of music awaits you.

The ACE is both intuitive and easy to use. Featuring all new advanced setup software, this is the most configurable and customizable MOON component ever offered. Bridging digital and analog audio at a price-to-performance ratio that is impossible to beat, the ACE includes a high resolution DAC with DSD decoding up to DSD256 and 32-bit/384kHz PCM. At the other end of the audio spectrum, a moving magnet phono preamplifier rounds out this complete package.

The finest sounding and most complete “all-in-one” available, the ACE can do virtually anything expected of a high-performance audio component of this nature. Accentuated by our world renowned MOON sonic signature - visceral tight bass, transparent midrange, precise natural highs - along with lifelike sound, plus countless features, the ACE will be the “heart and soul” of all your musical indulgences.

$4,500.00

 


250i

Integrated amplifier

Versatile and intuitive to use, the Nēo 250i delivers a seductive musical performance and represents and outstanding value. Well respected and known for exceptional price-to-quality ratio, the 250i marries a classy appearance, true MOON-build quality and irreproachable sound quality without equal in its price class.

  • Output Power at 8Ω,  50 Watts per channel
  • Output Power at 4Ω ,100 Watts per channel
  • Input Sensitivity , 370mV - 3.0V RMS
  • Damping Factor,  > 200
  • Gain ,37dB
  • Signal-to-noise Ratio ,> 101dB @ full power
  • Frequency response (full range) .................... 10Hz - 100kHz +0/-3dB
  • Crosstalk , -78dB
  • THD (20Hz - 20kHz @ 1 watt), < 0.015%
  • THD (20Hz - 20kHz @ 50 watts), < 0.02%
  • Intermodulation distortion , < 0.05%
  • Shipping weight, 22 lbs / 10 Kgs
  • Dimensions (width x height x depth),16.9 x 3.5 x 14.4 in., 42.9 x 8.9 x 36.6 cm
  • Product specification

$2,500.00 each


350P

Balanced Preamplifier

Optional DAC & Phono Stage

  • Input Sensitivity, 200mV - 5.0V RMS
  • Input impedance, 22,000Ω
  • Gain, 6dB
  • Signal-to-noise Ratio,(20Hz-20kHz) 120dB @ full output
  • Frequency response (full range), 5Hz - 100kHz +0/-3dB
  • Crosstalk @ 1kHz, -96dB
  • Output impedance,100Ω
  • THD (20Hz-20kHz), 0.0005%
  • Intermodulation distortion, immeasurable
  • Optional Digital Inputs, S/PDIF, USB, Optical
  • Optional Digital Inputs Max. Resolution, 24-bit / 192kHz
  • Shipping weight, 16.5 lbs / 7.5 Kgs
  • Dimensions (width x height x depth), 16.9 x 3.5 x 13.1 in., 42.9 x 8.9 x 33.3 cm.  

350P $3,900.00 each

350P D3P $4900.00 each- 32Bit DSD DAC, Phono Stage, 

NAD

C 388

  • • 150W x 2 Continuous power into 8 or 4 Ohms
  • • 250W, 350W and 400W IHF Dynamic Power into 8, 4 and 2 Ohms, respectively
  • • Bluetooth ADP4 with aptX supported
  • • MM Phono input
  • • Analogue line inputs
  • • USB Port for service purposes
  • • SPDIF coax and optical inputs
  • • Speaker A, Speaker B
  • • Preamp/Subwoofer out
  • • Headphone amplifier
  • • MDC Slots for future upgrades
  • • IR remote
  • • Smartphone Control App
  • • 12V Trigger in/out
  • • IR in/out
  • • RS-232 Serial port for control

$2,199

w/ BluOS $2,699  


C 368

  • 80W x 2 Continuous power into 8 or 4 Ohms
  • 145W, 240W and 260W IHF Dynamic Power into 8, 4 and 2 Ohms respectively
  • Bluetooth ADP4 with aptX® supported
  • MM Phono input
  • Analogue line inputs
  • USB port for service purposes
  • SPDIF coax and optical inputs
  • Speaker A, Speaker B
  • Stereo or Bridge mode confi guration
  • Preamp/Subwoofer out
  • Headphone amplifier
  • MDC Slots for future upgrades
  • IR Remote
  • Smartphone Control App
  • 12V Trigger in/out
  • IR in/out
  • RS-232 Serial port for control
  • Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

$1,249

w/ BluOS $1,749


C 338

  • 50W x 2 Continuous Power into 8 or 4 Ohms
  • 90W, 150W and 200W IHF Dynamic Power into 8, 4 and 2 Ohms, respectively
  • Wi-Fi enabled with network streaming of music services, internet radio,and UPnP • Bluetooth® ADP4 with aptX® supported
  • MM Phono input
  • TV audio input
  • SPDIF coax and optical inputs
  • Subwoofer out
  • Headphone amplifier
  • Bass EQ
  • IR Remote
  • Mobile Control App for smartphone and tablet

$899


C 275BEE

  • 2 x 150W Minimum Continuous Power into 4 / 8 Ohms, all channels driven simultaneously 20Hz – 20kHz, with <0.008%THD (NAD Full Disclosure Power) 
  • 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 Ohms, respectively
  • PowerDrive™ amplifier technology
  • Holmgren Toroidal Power transformer
  • All discrete circuitry
  • Class A Voltage Stages
  • Distortion Canceling Circuit
  • BEE Anti-saturation Clamp
  • Short signal path from input to output
  • All sockets Gold plated
  • NAD Soft Clipping™
  • ATOLogic 12 volt trigger/signal sensing input 
  • Detachable IEC Power Cable
  • <1W Standby Power Consumption
  • Free of lead and other environmentally dangerous substances

$1,799


C 165BEE

  • 6 Line Level Inputs
  • Phono Input with selectable Moving Coil and Moving Magnet sensitivity settings
  • 3 position Resistance and Capacitance settings for Phono Input
  • 2 Line Level Outputs, one variable from 0dB to -12dB
  • Subwoofer Output
  • Independent Headphone Amplifier
  • Pure Class A Gain Modules
  • Sealed Reed Relays for Input Switching
  • Heavy Gauge Steel Chassis
  • Bass and Treble Controls with Defeat Switch (bypass]
  • Gold Plated Sockets
  • 12V Trigger Output
  • IR In and Out
  • Detachable Power Cord
  • SR 8 NAD 4 Device System remote Control
  • <1 watt Standby Consumption

$1,349



PrimaLuna

DiaLogue Premium HP Integrated amplifier

“PrimaLuna’s DiaLogue Premium HP is an integrated amplifier whose sound quality closely approaches that of pairings of reference Class A preamps and power amps.”

— ROBERT DEUTSCH, STEREOPHILE U.S.A.

  • Output Power: Ultra-linear (8 Ohms, 1% THD),70 watts x 2 (EL34), 73 watts x 2 (KT88), 89 watts x 2 (KT120),96 watts x 2 (KT150)
  • Output Power: Triode (8 Ohms, 1% THD), 40 watts x 2 (EL34),42 watts x 2 (KT88), 51 watts x 2 (KT120), 54 watts x 2 (KT150)
  • Inputs:  5 Pair RCA +1 Pair HT Bypass
  • Outputs: 4 & 8 Ohm speaker outputs ,RCA Subwoofer Out, 1/4" Headphone Out
  • Headphone Out, 11.4 watts (32 Ω, 1% THD),6.56 watts (64 Ω, 0.70% THD), 3.05 watts (150 Ω, 0.60% THD), 1.58 watts (300 Ω, 0.60% THD), 0.82 watts (600 Ω, 0.60% THD)
  • Freq. Response (+/- 1dB): 7Hz-75kHz (KT120 & KT150), 7Hz-70kHz (KT88), 7Hz-65kHz (EL34)
  • THD (1W/1kHz)< 0.1%
  • S/N Ratio: 93 dB (KT120 & KT150), 92 dB (KT88 & EL34)
  • Input Sensitivity360mV (KT120 & KT150): 320mV (KT88 & EL34)
  • Input Impedance: 100k Ohm
  • Standard Tube Compliment6 - 12AU7, 8 - EL34
  • Dimensions (WxHxD):15" x 8.3" x 15.5"
  • Weight:66.3 lbs

Price from $6399


DiaLogue Premium HP Power Amplifier

  • Output Power, Stereo, Ultra-linear, (8 Ohms, 1% THD): 70 watts x 2 (EL34),  73 watts x 2 (KT88), 85 watts x 2 (KT120), 96 watts x 2 (KT150)
  • Output Power, Stereo, Triode, (8 Ohms, 1% THD): 40 watts x 2 (EL34), 43 watts x 2 (KT88),  45 watts x 2 (KT120), 48 watts x 2 (KT150)
  • Output Power, Mono, Ultra-linear, (8 Ohms, 1% THD): 148 watts (EL34), 148 watts (KT88), 175 watts (KT120), 192 watts (KT150)
  • Output Power, Mono, Triode, (8 Ohms, 1% THD): 85 watts (EL34), 85 watts (KT88),  94 watts (KT120), 98 watts (KT150)
  • Inputs: 1 Pair RCA
  • Outputs: 4, 8, & 16 Ohm output taps (stereo), 2, 4, & 8 Ohm output taps (mono)
  • Freq. Response (+/- 1dB): 9Hz-59kHz (stereo) 8Hz-69kHz (mono)
  • THD (1W/1kHz): < 0.1% (stereo) < 0.1% (mono)
  • S/N Ratio: 99 dB (stereo) 105 dB (mono)
  • Input Sensitivity: 1.2V (stereo) 1.1V (mono)
  • Input Impedance:100k Ohm
  • Power Consumption: 280 watts
  • Standard Tube Compliment: 6 - 12AU7, 8 - EL34
  • Dimensions (WxHxD): 15" x 8.3 " x 14.2"
  • Weight: 66.3 lbs

$5699


DiaLogue Premium Integrated Amplifier

  • Output Power, Ultra-linear, (8 Ohms, 1% THD): 48 watts x 2 (KT150), 43 watts x 2 (KT120), 40 watts x 2 (KT88), 36 watts x 2 (EL34)
  • Output Power, Triode, (8 Ohms, 1% THD): 24 watts x 2 (KT150), 22 watts x 2 (KT120), 20 watts x 2 (EL34 & KT88)
  • Inputs: 5 Pair RCA +, 1 Pair HT bypass
  • Outputs: 4 & 8 Ohm,RCA Subwoofer Out
  • Freq. Response (+/- 1dB): 5Hz-69kHz (KT120), 5Hz-32kHz (KT88), 5Hz-30kHz (EL34) 
  • THD (1W/1kHz): 0.2% (KT120), 0.25% (KT88), 0.14% (EL34)
  • S/N Ratio: 81 dB (KT120 & KT88), 79 dB (EL34)
  • Input Sensitivity: 280mV (KT120), 240mV (KT88), 230mV (EL34)
  • Input Impedance: 100k Ohm
  • Power Consumption: 255 watts
  • Standard Tube Compliment6 - 12AU7, 4 - EL34
  • Dimensions (WxHxD): 15" x 8.3" x 14.2"
  • Weight: 63.8 lbs

$4,899


DiaLogue Premium Preamplifier 

  • Inputs: 5 Pair RCA +, 1 Pair HT bypass
  • Outputs: 2 RCA Preamp Outs, 1 Pair RCA Fixed Tape Out
  • Gain: 10 dB
  • Freq. Response (+/- 1dB): 10Hz - 95kHz
  • THD: Less than 0.5% at 2 Volts
  • S/N Ratio: 93 dB
  • Input Sensitivity: 650mV
  • Input Impedance: 220k Ohms
  • output Impedance: 256 Ohms
  • Power Consumption: 61 watts
  • Standard Tube Compliment: 6 - 12AU7, 2 - 5AR4
  • Dimensions (WxHxD): 15" x 8.3" x 14.2"
  • Weight: 52.9 lbs

$4,599


DiaLogue Premium Power Amplifier

  • Output Power, Stereo, Ultra-linear, (8 Ohms, 1% THD): 36 watts x 2 (EL34), 40 watts x 2 (KT88), 43 watts x 2 (KT120), 48 watts x 2 (KT150)
  • Output Power, Stereo, Triode, (8 Ohms, 1% THD): 20 watts x 2 (EL34), 20 watts x 2 (KT88), 22 watts x 2 (KT120), 24 watts x 2 (KT150)
  • Output Power, Mono, Ultra-linear, (8 Ohms, 1% THD): 72 watts (EL34), 80 watts (KT88), 84 watts (KT120), 96 watts (KT150)
  • Output Power, Mono, Triode, (8 Ohms, 1% THD): 36 watts (EL34), 40 watts (KT88),  42 watts (KT120), 48 watts (KT150)
  • Inputs: 1 Pair RCA
  • Outputs: 4, 8, & 16 Ohm output taps (stereo), 2, 4, & 8 Ohm output taps (mono)
  • Freq. Response (+/- 1dB): 12Hz-75kHz (stereo), 9Hz-85kHz (mono)
  • THD (1W/1kHz): 0.1% (stereo), 0.17% (mono)
  • S/N Ratio: 94 dB (stereo), 93 dB (mono)
  • Input Sensitivity: 880mV
  • Input Impedance: 100k Ohm
  • Power Consumption: 280 watts
  • Standard Tube Compliment: 6 - 12AU7, 4 - EL34
  • Dimensions (WxHxD): 15" x 8.3 " x 14.2"
  • Weight: 63.8 lbs

$4,599


ProLogue Premium Monoblocks

  • Output Power, (8 Ohms, 1% THD): 70 watts (EL34), 70 watts (KT88), 80 watts (KT120), 90 watts (KT150)
  • Inputs: 1 Each RCA
  • Outputs: 2, 4, & 8 Ohm output taps
  • Freq. Response: 20Hz-85kHz +/- 0.5dB
  • THD: Less than 1% at full power
  • S/N Ratio: 101 dB
  • Input Sensitivity: 911mV
  • Input Impedance: 100k Ohm
  • Power Consumption: 210 watts (per amp)
  • Standard Tube Compliment (per amp): 4 - 12AU7, 4 - EL34
  • Dimensions (WxHxD): 14.5" x 8" x 15.5"
  • Weight:n46.3 lbs (per amp)

$6,399 pair


ProLogue Premium Integrated Amplifier

  • Output Power, Ultra-linear, (8 Ohms, 1% THD): 35 watts x 2 EL34, 40 watts x 2 KT88, 44 watts x 2 KT120, 48 watts x 2 KT150
  • Inputs: 4 Pair RCA +, 1 Pair HT Bypass
  • Outputs: 4 & 8 Ohm
  • Frequency Response: 20Hz-30kHz +/- 0.5dB
  • THD (1W/1kHz): < 1% @ full power
  • S/N Ratio: 89 dB
  • Input Sensitivity: 300mV
  • Power Consumption: 300 watts
  • Standard Tube Compliment: 4 - 12AU7, 4 - EL34
  • Dimensions (WxHxD): 14.5" x 8" x 15.5"
  • Weight: 46.3 lbs

$3,499


ProLogue Premium Stereo Power Amplifier

  • Output Power, (8 Ohms, 1% THD): 35 watts x 2 (EL34), 40 watts x 2 (KT88), 44 watts x 2 (KT120), 48 watts x 2 (KT150)
  • Inputs: 1 Pair RCA
  • Outputs: 4 & 8 Ohm output taps
  • Freq. Response: 20Hz-85kHz +/- 0.5dB
  • THD: Less than 1% at full power
  • S/N Ratio: 89 dB
  • Input Sensitivity: 775mV
  • Input Impedance: 100k Ohm
  • Power Consumption: 210 watts
  • Standard Tube Compliment: 4 - 12AU7, 4 - EL34
  • Dimensions (WxHxD): 14.5" x 8" x 15.5"
  • Weight: 46.3 lbs

$3,199


Prologue Premium Preamplifier

  • Inputs: 4 Pair RCA +, 1 Pair HT bypass
  • Outputs: 2 RCA Preamp Outs, 1 Pair RCA Fixed Tape Out
  • Gain: 12 dB
  • Freq. Response (+/- 3dB): 4Hz - 85kHz
  • THD: Less than 1% at full power
  • S/N Ratio: 109 dB unweighted
  • Input Sensitivity: 200mV
  • Input Impedance: 100k Ohms
  • Output Impedance: 2800 Ohms
  • Power Consumption: 46 Watts
  • Standard Tube Compliment4 - 12AU7, 2 - 5AR4
  • Dimensions (WxHxD): 14.5" x 8" x 15.5"
  • Weight: 37.5 lbs

$4,599


Prologue Classic Integrated Amplifier

 

  • Output Power, Ultra-linear, (8 Ohms, 1% THD): 35 watts x 2 EL34, 40 watts x 2 KT88, 44 watts x 2 KT120
  • Inputs: 4 Pair RCA
  • Outputs: 4 & 8 Ohm
  • Frequency Response: 10Hz-65kHz +/- 3dB
  • THD (1W/1kHz): < 1% @ full power
  • S/N Ratio: 89 dB
  • Input Sensitivity: 285mV
  • Power Consumption: 285 watts
  • Standard Tube Compliment: 2 - 12AX7,2 - 12AU7, 4 - EL34
  • Dimensions (WxHxD): 11" x 7.5" x 15.5"
  • Weight: 37.5 lbs

$2,599


AI-501DA

Integrated amplifier, digital to analogue converter and headphone amplifier

The AI-501DA integrated power amplifier with 192kHz USB digital audio inputs and low power consumption is the powerhouse of TEAC's new 501 series. Hosting a BurrBrown PCM5102 D/A Converter, USB connectivity, Class-D ABLETEC Norway amplifier and a toroidal-core power transformer makes the AI-501DA a key component for the 501 series or any other 2-channel audio system.

  • 60W + 60W (4 ohms, 20Hz to 20kHz)
  • 30W + 30W (8 ohms, 20Hz to 20kHz)
  • 4 ohms to 8 ohms
  • Digital Inputs, Type B connector x 1 (USB 2.0 compliant), coaxial x1 and optical x1
  • Analogue inputs, 
  • Headphone, Standard 6.3mm stereo jack
  • Headphone maximum output level, 50mW + 50mW or more (32 ohms, THD+N 0.1%)
  • Overall dimensions, 290(W) x 81.2(H) x 264(D) mm, 11.4"(W) x 3.2"(H) x 10.4"(D)

Product specification

$1299 on display


AX-501

Integrated amplifier, headphone amplifier

  • ABLETEC Class-D Power Amplifier with Maximum Available Output of 120W +120W (4 ohms)
  • 100W + 100W (4 ohms, 1kHz, JEITA)
  • 65W + 65W (8 ohms, 1kHz, JEITA)
  • XLR Balanced Input Terminals for USB DAC Balanced Connection    
  • Fully-balanced Circuitry to Eliminate Unwanted Analog Circuit Noise  
  • CCLC System for High Linearity Headphone Output   
  • Over-sized Toroidal-core power transformer     
  • No Cooling-Fan, for Quiet Operation  
  • Full-Metal Construction and Small Footprint for Any Desktop Set-up  
  • Large Number of Inputs Allow Users to Integrate Full-Scale Hi-Fi Systems  
  • Well-Designed User Interface

Product Specification

$1499

    
 


AI-301

Integrated amplifier, digital to analogue converter and headphone amplifier

  • Compact, with USB input and fully compatible with high-resolution DSD
  • Capable of 5.6MHz DSD native playback
  • Asynchronous mode-capable USB input
  • Coaxial and optical digital inputs offer versatility
  • Wireless playback at high sound quality via Bluetooth® using the aptX® codec
  • High-performance BurrBrown PCM1795 digital-analog converter
  • ICEpower high sound quality Class-D amp circuit
  • CCLC circuits provide high-quality headphone output
  • Well-engineered aluminum enclosure, compact proportions

product specification

$749 on display

 


AI-101DA

Integrated amplifier with USB DAC and headphone amplifier

The AI-101DA is a small book-sized USB DAC Amplifier designed all-in-one for the next generation, who mainly use a computer and smartphone. The AI-101DA allows users to enjoy both high-resolution audio streaming from a computer, and high-quality wireless audio streaming from a smartphone via Bluetooth® aptX® codec. In addition to a USB audio input and Bluetooth® connection, the AI-101DA also employs a pair of optical digital audio inputs and an analog audio input for traditional audio players like CD player or portable audio player, just in case.
The secrets of the next-gen audio system are not only the versatility of its audio inputs, but the tech under its aluminum skin, utilising the latest DSP-based technology “HR Loudness” to maximize comprehensive sound performance. The AI-101DA’s compact body enables convertible layout, horizontal or vertical to fit with tiny space near TV stand or STB, while TEAC’s iconic side guard bars give a professional finish.

$499 on display


 A-S3000

  • Rigid Streamlined Construction— provides strict anti-vibration protection, and enables shortest cabling routes
  • Large toroidal transformer, solidly mounted with independent three-dimensional inner frame
  • Comprehensive low impedance design, shortened signal paths and copper-plated chassis
  • 1/4 inch (6 mm) thick top panel made of non-magnetic aluminum plate
  • symmetrical design for independent pre amp and power amp blocks
  • Floating and balanced power amplifier with MOSFETs
  • All amplifier stages balanced topology
  • Massive direct drawing toroidal transformer for complete elimination of signal transmission loss
  • Exceptionally low impedance output impedance
  • Precision made volume control 
  • Discretely configured phono amp
  • Oversized gold plated binding posts for exceptional speaker wire contact.
  • Obsessive, meticulous switch design— elaborate, richly textured, easy-to-use

$8,999

 


N500

Network integrated amplifier

  • Listen to Internet radio stations from around the world and access music streaming.
  • AirPlay compatible
  • NP Controller App lets you operate from your smartphone or tablet.
  • FLAC or WAV 192kHz/24-bit audio playback.
  • Digital audio input for TV or Blu-ray player
  • USB digital connection for iPod, iPhone, iPad and USB devices
  • ToP-ART sound quality design and highest quality parts
  • Pure Direct Mode for greater sound purity and Continuously variable loudness control
  • Simple yet Sophisticated Design

$570


R-S700

Stereo Receiver

  • iPhone/iPod/Bluetooth® compatibility
  • iPod video out allows connection to a TV
  • Dual aluminum-extruded heat sinks
  • Continuous Variable Loudness Control
  • Subwoofer out
  • Speaker A, B or A+B 
  • Minimum RMS Output Power (8 ohms, 20 Hz-20 kHz):100W + 100W (0.019% THD)
  • Pure Direct 
  • Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz): 0.015% (50 W/8 ohms)
  • Zone 2 Output 
  • Signal-to-Noise Ratio (CD):107 dB (CD Direct on, 200 mV)
  • Frequency Response: 10 Hz-100 kHz ±1 dB (Main In)
  • Audio In / Out: 6 / 2
  • FM Signal-to-Noise Ratio (Mono/Stereo): 74 dB / 70 dB
  • Dimensions (W x H x D): 435 x 151 x 387 mm
  • Weight:11.2 kg

$699


CD-C600

Five-disc CD Changer

  • Yamaha patented PlayXchange
  • Full opening disc tray for changing 5 discs at a time
  • Pure Direct
  • Extremely sophisticated circuitry and layout for short signal paths
  • High performance DAC
  • MP3 and WMA compatibility
  • USB port on front panel
  • iPod compatibility
  • RS-232C interface and IR in/out
  • Dimensions (W x H x D): 435 x 116 x 405 mm
  • Weight: 6.2 kg

$449


CS-S300

CD Player

  • Short signal paths
  • High quality parts
  • High performance DAC for high conversion precision with low noise
  • MP3 and WMA compatibility
  • USB port on front panel 
  • iPod compatibility
  • Optical and Coaxial Output     
  • Dimensions: (W x H x D) 435 x 86 x 260 mm
  • Weight: 3.5 kg

$399


Elite N50

Network Streamer

  • 32 Bit 192 KHz AKM asynchronous DACs
  • AirPlay® Compatible
  • Network-capable for Internet Radio and DLNA support
  • iPhone or Android Control Application
  • 2.5” Full-Color LCD Display
  • Twin EL Transformers
  • Armoured Chassis Construction (16 lbs)

$699


Elite A20

Integrated amplifier

  • 30W x 2 into 8 Ohms
  • Direct Energy Design Amp
  • Symmetrical Power Amp
  • Clean Ground Construction
  • Isolated Power Supply
  • Source Direct Mode
  • Trans-Stabilizer

$349