Headphones

Alpha Design Labs (ADL)

ADL EH008

  • Dual Dynamic Drivers for full range sound reproduction
  • α (Alpha –Cryo treated) 8mm driver for
    mid-to-low frequencies
  • α (Alpha –Cryo treated) 5.8mm driver for high frequencies
  • 5.8mm driver with Titanium Trembler Film for high resolution sound reproduction
  • Inner housing constructed of special ABS resin for driver stabilization
  • Outer housing constructed of Carbon Fiber for its superior damping properties
  • Rubber outer seal ring with silicon cover for improved sound isolation and added comfort
  • Beautifully finished diamond cut
    aluminum end plates.
  • XS / S / M flexible rubber earpieces included
  • 1.3m cord with 24k gold-plated stereo
    α (Alpha)1/8”(3.5mm) angled plug

$311.00 a pair


 

H118

Over ear headphones

  •     Dynamic closed-back circumaural headphones
  •     High noise attenuation and low distortion tailor-made diaphragms
  •     40mm extra-large high-flux α (Alpha –Cryo treated) magnet
  •     Ring between voice-coil and diaphragm keeps ultra-high-frequencies in phase
  •     Excellent transient response from extremely light-weight coils of copper-coated special aluminum alloy wire
  •     Furutech nonmagnetic rhodium-plated stereo α (Alpha) mini XLR socket, Included in package
  •     3.0 meter cable and gold-plated 1/8”(3.5mm) to 1/4”(6.3mm) adapter

$220.00 a pair


ADL H128

The ADL H128 is balanced in a completely audiophile way. Rich tonal colours and textures with intimate and close harmonic interplay, a sense of space and quiet backgrounds are the key.

With these our latest breakthrough headphones we decided to take the performance of our now classic H118 headphones one step further. We wanted to retain the H118’s smooth, well-balanced sound that has captivated so many headphone enthusiasts, but we also wanted to improve dynamics and recreate the same “punch” that you hear during live performances—a lofty goal for a pair of headphones. With the new H128, we’ve succeeded at reaching that goal. At ADL we determined that the best way to accomplish this was to design and develop a completely new driver from scratch with the help of our engineers at Furutech and sound tune the headphones with input from a team of renowned Japanese audio commentators.

  • Dynamic closed-back circumaural headphones
  • Furutech designed high noise attenuation and low distortion tailor-made diaphragms
  • 40mm extra-large high-flux α (Alpha) Cryo-treated magnet • High quality PEEK trembler film
  • Ring between voice-coil and diaphragm keeps ultra-high-frequencies in phase
  • Sturdy vibration damping aluminum headband
  • Excellent transient response from extremely light-weight coils of copper-coated special aluminum alloy wire
  • Furutech rhodium-plated (Alpha) Cryo-treated mini-XLR socket

$565.00 a pair


ADL Stride II

ADL STRIDE-II Portable Headphone Amplifier

  •  High-end performance, Furutech takes what's there and makes it better!
  • Beautifully-finished atomized black or silver-white aluminum body with anodized aluminum side panels
  • Fits in the palm of your hand, enjoy your music anywhere 
  • High quality volume control (front) and On/Off switch (rear)
  • Gold-plated 3.5mm analog line input (switched) or gold-plated USB digital input for PC audio (Phone jack overrides output from USB mini-B interface on rear panel)
  • Runs on USB power or an AC/DC switching power adapter that recharges battery
  • High performance headphone amplifier drives 12 to 600 ohm headphones 
  • Gold-plated circuitry on high quality printed circuit board
  • DAC Chip: WM8716 24bit/192kH
  • USB Chip: TE7022L 24bit/96kHz

$327.00


ADL Cruise

It's the age of personal, portable electronics; everyone carries their music with them. Accessories reflect your personal style and the Cruise is sure to create jealousy and envy wherever you go. It delivers thrilling sound to match its gorgeous appearance.

Whether you're using iTunes for low-bit-rate downloads or high resolution music files just connect your computer to the Cruise with one of our matching ADL Formula 2 USB cables or the new i-D35SP analog stereo cables. When you're on the road plug your music player's analog headphone output into the line input of the Cruise and open the player's volume to maximum and use the volume control on the Cruise.

For higher resolution all-digital signals simply connect the Cruise to your computer's USB port. The USB port charges the battery and you can listen to music while it's charging!

  • Mega performance, Furutech takes what’s there and makes it better!
  • Beautifully finished, lustrous carbon fiber body and mirror-polish nonmagnetic stainless steel panel.
  • Fits in the palm of your hand, enjoy your music anywhere
  • High quality volume control (front) and On/Off switch (rear)
  • Gold-plated 3.5mm analog line input (switched) or gold-plated USB digital input for PC audio (Phone jack overrides output from USB mini-B interface on rear panel)
  • Runs on USB power or an AC/DC switching power adapter that recharges battery
  • High performance headphone amplifier drives 12 to 600 ohm headphones
  • Gold-plated circuitry on high quality printed circuit board

$539.00


ADL X1

The X1 is small, discrete but highly specified with inputs supporting iOS digital at up to 16/48 via APPLE MFI certified USB Cable for iPod, iPhone, iPad devices. The X1 also runs 24/192 SPDIF with high-resolution files from PC via the PC’s USB output. There’s an analog line-level 4-pin 3.5mm input and a 4-pin 3.5mm output for headphones in the 12~600 ohm range. The 4-pin input supports 3.5mm Remote and Mic Earphones. The 3.5mm TOSLINK optical output delivers USB source signal up to 24/192. There’s a convenient GND TRRS switch making it easy to change from one 4-pin set of ‘phones to another.

$565.00


what_hifi_GT40_218.png

GT40a

Alpha Design Labs 24bit/192KHz GT40α USB DAC with MM/MC Phono Stage and variable pre out

  • High performance 24bits/192kHz “VIA VT1736 “USB chip and 24bits/192kHz “Cirrus Logic CS4270” DAC /ADC chip
  • USB Recording Resolution: 24bits/192kHz (Max) supports 44.1 /48 /88.2 /96 /176.4 /192 (kHz)
  • Frequency response: 20Hz ~ 20kHz (+/-0.5 dB) 
  • Enjoy audio in high resolution at 24bits/192kHz surpassing conventional 16bit/44.1KHz standards
  • Incorporates the most trusted driver in professional audio for 24bits/192kHz recording and playback
  • External power supply: while a USB-powered device might be convenient, it won’t develop the power required for high resolution playback, so we designed the GT40α with an external power supply to solve the problem.
  • Headphone Amplifier: It contains a high performance “Maxim MAX9722A” headphone amplifier with ample drive for good headphones
  • Analog-to-Digital Converter: The GT40α sports a high-performance ADC IC chip for high resolution recordings via analog inputs including phono, AM/FM radio, or other analog signals.
  • Convenient Clip signal Toggle switch for Recording Attenuation: Adjust the recording attenuation to avoid any distortion during recording: 0dB, 6 dB, or 12dB (RecAtt/db signal light comes on when input level exceeds circuit Gain).
  • Phono Preamplifier: A first for this class, the GT40α features a phono equalizer for recording your precious LPs. Switch between Moving Magnet (MM) and Moving Coil (MC) or Line input
  • Highest Quality Parts: The GT40α features a high quality amplifier and condenser supporting its high performance analog circuit (NJM5532 OPAMP: for ADC,DAC,Line in and out and NJM2068 OPAMP: for Phono )
  • High End Audio Grade Connections: The GT40α is equipped with gold-plated Teflon-insulated RCA jacks with an extremely high quality aluminum chassis and machined volume knob
  •  Dimensions: 150 (W) x 111 (D) x 57 (H) mm
  • Weight: 650g Approx.

$820.00


Aedle

Valkerie VK1

  • VK-1  combine minimalistic and refined design with high-definition custom made titanium transducers.  
  • Hand-assembled in France.                                                                                     
  • Low impedance design makes these beautifully crafted on ear headphones perfect for use with portable devices and laptop computer.
  • One-Year Warranty

Includes
3.5mm - 1.2m Cable with microphone and remote control
3.5mm - 1.2m Aramid fiber coated cable
3.5mm - 2.4m Aramid fiber coated cable
Aedle Serial Number Metal Card
Travel Pouch
Airline adapter + 6.5 mm adapter
Booklet 

Specifications

Available in tan and brushed aluminium, black and brushed aluminium, black and black aluminium.

$549 a pair


AKG

N90Q

Inspired by the Grammy Award winning producer Quincy Jones, comes the AKG N90Q, a state of the art, flagship level headphone that represents the pinnacle in acoustic performance and audio customization.

  • Impedance: 32ohms
  • Max Input Power: 100mW
  • Weight: 460g
  • Cable Length: 3m and 1.2m detachable cables included
  • Frequency Response: 10-30kHz
  • Sensitivity: 110dB SPL @ 1kHz/100mV

$2,700.00 a pair


Q701

Over-ear closed back studio Headphone

  • Frequency Response: 10Hz - 39.8kHz
  • Maximum Input Power: 200 mW
  • Input Impedance: 62 ohms
  • Sensitivity: 105 dB SPL/V
  • GENERAL SPECIFICATIONS
  • Cable: 3.00 m
  • Connector: Hard gold-plated jack plug and contacts
  • Weight: 235 g
  • Colour: Black with Lime accents, Lime o

 

Starting from $599.99 a pair


eisa k845 award.jpg

K845BT

Studio quality bluetooth headphones

The ultra-cool, ultra-comfortable AKG K 845BT headphones with studio-quality sound. Thoughtful enhancements like enriched bass response, better fitting ear-cups, Bluetooth and NFC connectivity make the AKG K 845BT the perfect companion for those with refined taste for quality sound. The AKG K 845BT also offers instant connectivity to a range of smartphones and devices. That way you are never far from your favorite music. Another interesting feature of the AKG K 845BT is its comfortably fitting earphones with conveniently placed control buttons on the ear cups. It’s so comfortable that you won’t take them off. But if you do, the fold-down storage mechanism comes in handy for easy storage and safe portability. Now stay connected with your playlist in style.

AKG K 845BT - “it’s plain that those large drive units produce an incredibly clear sound – crisp, detailed, open and precise across the frequency spectrum” http://bit.ly/1e7lEeQ
– 5 star review in What Hi Fi magazine – February 2012

product specifications

$524.99 a pair


whf-5star-logo.jpg

K3003i

Reference Class 3-Way earphone

The K3003s have three sound tuning filters to give today’s audio connoisseur complete control. With their reference sound and true 3-way design, these high-end headphones are arguably the best in ear designs available, truly superb!

K3003i, the priciest in-ears we’ve tested, but also, by a massive margin, the best. They even put pricely full-size units to shame.
– 5 star review in What Hifi magazine! – October 2012 

Product Specification

$1,800.00 a pair


N20

  • Sensitivity: 115dB SPL/V @1kHz
  • Input Impedance: 24 ohms
  • Maximum Input Power: 10mW
  • Frequency Response: 12-20kHz

Starting from $225.00 a pair


Y50

Portable on ear headphones

  • Signature AKG-quality sound with enriched bass performance
  • On-ear headphone with closed ear-cup design for reduced ambient noise
  • Long-lasting, comfortable fit with rugged, lightweight design
  • Detachable, 1.2m. Cable with inline, one-button remote/mic for complete hands-free accessibility
  • 3D-Axis folding mechanism and pouch for easy storage and safe transport

$180.00 a pair

w/ Bluetooth, $270.00 a pair


Audio Technica

 

ATH-A900x

Audiophile closed back dynamic over-ear headphones

Audio-Technica's ATH-A900x closed-back dynamic headphones deliver audiophile-quality acoustic performance with superior, deep bass and vocal projection unmatched in its class. The headphones feature large-aperture 53 mm drivers for high-fidelity playback. Equipped with A-T’s innovative self-adjusting wing support mechanism, the headphones offer long hours of remarkably comfortable listening.

  • Audiophile -quality headphones with aluminum housing
  • Closed-back Double Air Damping System for deep bass reproduction
  • Large aperture 53 mm drivers for high-fidelity playback
  • Superior, deep bass and vocal projection unmatched in its class
  • CCAW voice coils and OFC (oxygen-free copper) cloth-wrapped cable
  • 3D Wing Support Housing offers a vibration-proof mechanism that provides comfortable support for a better listening experience
  • Extremely comfortable ear-fitting pads

$369.99 a pair


MSR-7

Springing from Audio-Technica’s rich heritage in professional audio, the ATH-MSR7 Over-Ear High-Resolution Audio Headphones are designed to reproduce Hi-Res Audio, allowing users to hear music the way it was intended. The over-ear headphones are outfitted with exclusive 45 mm True Motion Drivers, which utilize lightweight voice coils, a custom-mounted printed circuit board and specially designed diaphragm to improve transient response and minimize sound distortion for rich, detailed audio reproduction. 

  • Type: Dynamic
  • Driver Diameter: 45 mm
  • Frequency Response: 5-40,000 Hz
  • Maximum Input Power: 2,000 mW
  • Sensitivity: 100 dB/mW
  • Impedance: 35 ohms
  • Weight: 290 g
  • Cable: Detachable 1.2 m (3.9') standard cable, detachable 3.0 m (9.8') standard cable, detachable 1.2 m (3.9') cable with in-line controls and microphone for smartphones
  • Connector: 3.5 mm gold-plated stereo mini plug, L-shaped
  • Accessories Included: Protective pouch
  • Type (Microphone): Condenser
  • Frequency Response (Microphone): 50 - 4,000 Hz
  • Polar Pattern (Microphone): Omnidirectional

$399.00


ATH-M70x

Pure. Professional. Performance. 
The latest addition to the critically acclaimed M-Series line, the ATH-M70x professional studio monitor headphones feature proprietary 45 mm large-aperture drivers and are tuned to accurately reproduce extreme low and high frequencies (5 to 40,000 Hz) while maintaining perfect balance. They are ideal for studio mixing and tracking, FOH, DJing, mastering, post-production, audio forensics and personal listening. Crafted for lasting durability, the studio headphones provide excellent sound isolation and are equipped with 90° swiveling earcups for easy, one-ear monitoring. 

  • Type: Closed-back dynamic
  • Driver Diameter: 45 mm
  • Magnet: Neodymium
  • Voice Coil: CCAW (Copper-clad aluminum wire)
  • Frequency Response: 5 - 40,000 Hz
  • Maximum Input Power: 2,000 mW at 1 kHz
  • Sensitivity: 97 dB
  • Impedance: 35 ohms
  • Weight: 280 g (9.9 oz), without cable and connector
  • Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
  • Accessories Included: Carrying case, 6.3 mm (1/4") screw-on adapter

$419


ATH-M50x

As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

  • Type: Closed-back dynamic
  • Driver Diameter: 45 mm
  • Magnet: Neodymium
  • Voice Coil: CCAW (Copper-clad aluminum wire)
  • Frequency Response: 15 - 28,000 Hz
  • Maximum Input Power: 1,600 mW at 1 kHz
  • Sensitivity: 99 dB
  • Impedance: 38 ohms
  • Weight: 285 g (10 oz), without cable and connector
  • Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
  • Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

Starting at $275.00 a pair


M40x

The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring. 

  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: CCAW (Copper-clad aluminum wire)
  • Frequency Response: 15 - 24,000 Hz
  • Maximum Input Power: 1,600 mW at 1 kHz
  • Sensitivity: 98 dB
  • Impedance: 35 ohms
  • Weight: 240 g (8.5 oz), without cable and connector
  • Cable: Includes two interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and detachable 3.0 m (9.8') straight cable
  • Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

$179.00 a pair


Bang & Olufsen

H9

  • Wireless headphones with Bang & Olufsen Signature Sound and advanced Active Noise Cancellation
  • Lightweight and long lasting luxurious materials in an over-ear design for extended comfort
  • Intuitive aluminum touch interface gives you control over your music and calls
  • Rechargeable and replaceable battery with up to 14 hours of playback capacity
  • Includes noise cancelling headphones, audio cable with 35 mm mini-jack, USB to Micro USB cable for charging, flight adaptor, carrying pouch and Quick Start guide

$649 a pair


Beoplay H8

  • Premium, light-weight, wireless, active noise cancelling on-ear headphones
  • Bang & Olufsen Signature Sound no matter if active noise cancellation is turned on or off
  • Aluminum touch interface on the right ear cup gives you complete control of your music and phone calls
  • Up to 14 hours of battery life with active noise cancellation and Bluetooth turned on
  • At just 255g, BeoPlay H8 is one of the lightest wireless active noise cancelling headphones on the market

$629 a pair


H7

Beoplay H7 brings you maximum comfort. No matter if the headphone is placed on your head or elegantly resting around your neck, it will feel as good as it looks. The soft lambskin on the ear cushions and their adaptive memory foam ensure you get a headphone that is comfortable enough to wear all day long.

$499 a pair


H6

Stylish over-ear headphones made from premium materials delivering top of the line sound quality

"Incredibly comfortable and a gorgeous design"

The H6 offers a truly natural and authentic sound performance with focus on a clear midrange with a balanced bass and treble performance. Includes a 40 mm custom designed driver with a neodymium magnet in a closed headphone design. BeoPlay H6 has a bass port which optimizes the bass performance and the drivers are slightly angled to get the best distance and sound direction into the ears.

  • Sound Principle - Dynamic, closed back
  • Frequency Range:- 20-22.000Hz
  • Designer: - Jakob Wagner
  • Colours: - Black leather,Natural leather, Bronzed Hazel, Graphite blush, Blue stone
  • In the box: - H6 headphone, Cable with 3-button remote,Headphone bag,Quick Start guide
  • Dimensions: - 197mm x 194mm x 40mm, 7.6 x 7.6 x 1.6 in
  • Weight: - 230g, 8.11 oz
  • Cord: - 1.2m, 3.9 ft

$399 a pair


H5

  • Immersive wireless sound for life on the move
  • Adaptive sound profile via the Beoplay App
  • Designed to be out and about (splash and dust resistant)
  • Comfortable on the long commute (and the short ones)

$299 a pair


H4

Wherever the day, or night, takes you, you can listen to music the way it was meant to be heard with the B&O PLAY by Bang & Olufsen Beoplay H4 Wireless Headphones.

  • Premium wireless, over-ear headphones with Bang & Olufsen Signature Sound
  • Designed with clean lines, minimalist expression and a focus on the pure essentials
  • Up to 19 hours of battery life with Bluetooth
  • High quality headphones made with leather, aluminum and steel
  • In the box: Beoplay H4 headphones, audio cable, USB cable, Quick Start guide
    • Frequency: 20 - 20,000 Hz
    • Microphone: One electret type, Omnidirectional
    • Loudspeaker: Electro-dynamic driver, 40 mm diameter
    • Bluetooth: Bluetooth 4.2 · AAC codec 10m operating range · Remembers the last 8 paired devices (connects to one)

$349.00 a pair


Beoplay H3

Crafted from a solid block of metal, BeoPlay H3 is an ultra-light earphone that stands on the shoulders of its predecessors, carrying forward the traditions of precision acoustics and craftsmanship, of building products that are able to reproduce the original sound material as authentically as possible. It’s a design that honours tradition but meets today’s demand for style.

$199.00 a pair


Earset 3i

Earset 3i is an ultra-light and adjustable headphone designed for people on the move. The robust and scratch-resistant materials combine quality and comfort with state-of-the-art design. The dynamic full tone loudspeakers are mounted on a telescopic bar, and a high signal-to-noise ratio means that your music is crisp and clear.

  • Tuned by Bang & Olufsen's acoustics department with a high signal-to-noise ratio that delivers your music crisp and clear
  • Made from brushed aluminum and a special soft-touch rubber coating;Inline remote and microphone
  • Adjustable and ergonomic, Earset 3i can be adjusted to fit the contours and curves of the individual ear
    • Loudspeaker: Electro-dynamic speaker
    • In-ear type: Intra concha earphone
    • Frequency range: 50 - 20,000Hz
    • Colours: Aluminium with black, white, green, orange, yellow
    • Cord: 1m, 3.3 ft
    • Features: 3 control buttons (up volume, down volume and control)
    • Microphone: Electret condenser

$249.00 a pair


Form 2i

Whether you’re cruising through the city on your bike – or chilling in the park listening to the latest tunes, Form 2i is a great companion. It delivers an impressive and honest sound performance.

  • Dimensions: 156 mm x 157 mm x 40 mm, 6.1 x 6.2 x 1.6 in
  • Weight: 90 g, 3.17 oz
  • Headphone Principle: Dynamic, semi open
  • Frequency Range: 20 Hz ~ 21000 Hz
  • Colours: Black, White, Red, Green, Blue, Grey
  • Designer: Steve McGugan

$129.00 a pair


BeyerDynamic

T 1

TOP QUALITY "MADE IN GERMANY"

The T 1 stands for top sound quality and precise workmanship like no other headphones from Beyerdynamic. It is the flagship of Beyerdynamic's premium range for the home and its unique Tesla technology sets new standards. The T 1 plays crystal clear, excels with faultless impulse fidelity and long-range, power sound quality. Its frequency range is extraordinarily harmonically tuned; its reproduction is spatially transparent and offers enjoyment of music for the most demanding of listeners..

SILKY-SMOOTH WARMTH MEETS PRECISE BASS

The second generation of this high-end model impresses thanks to a new, even further enhanced tuning with a touch more warmth and musicality that will delight audiophile listeners. Moreover, a carefully intensified bass gives fans of contemporary music, in particular, the low-frequency foundation that they are looking for.

TESLA TECHNOLOGY FOR GENUINE MUSIC ENTHUSIASTS

Tesla technology uses innovative sound transducers with over 1.0 Tesla (unit of measure for the magnetic flux density). The headphones therefore permit practically twice the volume of conventional models. Thanks to the enhanced efficiency the electric signal is converted into sound vibrations with virtually no loss of performance. The T 1 therefore offers greater performance reserves for dynamic and authentic musical fireworks.

STUDIO-QUALITY PLUG-IN CABLE

The new edition of the T 1 with textile-covered connection cable and screwable jack plug provides for optimum sound transmission. Its conductors, made from ultra-pure OCC copper, are among the best the industry has to offer. It can be removed from the headphones and, if required, exchanged for an optional cable with 4-pin XLR connector. This enables users with a headphone amplifier with the right outputs to take advantage of 'symmetrical transmission'.

HIGH QUALITY MATERIALS – ELEGANT DESIGN

The elegant appearance of the T 1 rounds off the technical fine details with the individually selected construction right down to the tiniest detail. The open earcups covered with a delicate metallic grill and subtle colour shades round off the premium appeal of this headphone model. The T 1 received the international design prize "Red Dot design award" for this in 2010.Soft, velour ear cushions made from hollow fibre are further hallmarks of the new generation of the T 1. They transport warmth and moisture away from the head, enabling the listener to enjoy music for hours without any unpleasant build-up of heat. A memory foam layer beneath the velour cover makes the ear cushions exceptionally soft.When not in use, the headphones can be stored in a luxurious hard case with a hinged lid. Not only is this ideal for transporting the headphones, but also perfect for displaying the classic piece next to your hi-fi system at home.You will enjoy the T 1 most impressively with the A 2 headphone amplifier from beyerdynamic – the "dream team" for true music lovers.

Features

  • Highly efficient Tesla technology drivers
  • Spacious, transparent and powerful sound
  • Extraordinary impulse fidelity
  • High impedance (600 Ohms)
  • Three metre long double-sided, detachable cable, OCC 7N copper conductors, textile braided
  • Connection cable with 3.5 mm jack plug and screwd-on 6.35 mm jack adapter
  • Breathable, super-soft ear cushions with memory foam
  • High-grade protein-coated leatherette headband
  • Luxury grade hard carry case included
  • Hand crafted "Made in Germany"
  • 5-years warranty

$1,899.00


T 90

The T 90 is the first high-end headphones with a completely open design utilizing our revolutionary Tesla technology. Only headphones of this kind can bring across the feeling of closeness and transparency - nothing stands between sound enthusiasts and their music. The perfect music experience in undisturbed surroundings. With the T 90 being tuned to spontaneous listening enjoyment, the music fan can immediately immerse himself in the sound. The T 90 combines the neutral analytic sound of the Tesla transducer with a full, warm timbre and a joy of playing that brings pleasure with it from the very first note. The T 90 not only stands out due to its high level of sound quality but also from its elegant appearance. The velvet materials used on the headband and ear pads ensure endless listening pleasure and wearing comfort.

  • Tesla technology providing the highest level of efficiency
  • High-resolution and spacious sound through its open design
  • Head and ear pads made from velvet microfiber
  • Incl. carrying bag

$949.00


DT990

The DT 990 PRO is an open dynamic headphone for studio applications. Due to a weight reduction of the diaphragm an excellent sound reproduction quality is achieved. Its rugged design with a spring steel headband ensures a secure fit and withstands all demands. Soft headband and ear cushioning systems ensure a high comfort over long periods of time.

available in 32Ω, 250Ω and 600Ω

$429.00


DT880

The DT 880 PRO is a reference-class, semi-open studio headphone which combines all strengths of open, transparent headphones with those of more powerful, closed headphones. Specially designed housings and an improved system equalization turn this “remake” of the studio classic DT 880 into an ideal studio monitoring headphone, with analytical qualities. Soft ear pads and adjustable, sliding, earpieces together with a single sided connecting cable ensure listening comfort during extended periods of use.

available in 32Ω, 250Ω and 600Ω

32Ω $349.00

250Ω $429.00

600Ω $429.00


T 51i

Like its sibling T 51 p, the focus for design of the T 51 i is delivering unrivalled sound quality. With new and improved drivers the headphones deliver in an inspiring way – right from the first moment. A particularly deep bass response and transparent, clear highs are apparent from the T 51 i due to the common properties that make all Tesla headphones so special: high efficiency and low distortion. The result: a clear, powerful sound across the entire frequency range, even at low levels. The closed design of the T 51 p also isolates external noise very effectively.

$499.00


iDX 200 iE

EXCELLENT SOUND

An extremely thin copper wire in the voice coil supplies lightning-fast responds to any change in voltage. As a result the iDX 200 iE provides a transparent sound reproduction. Especially the trebles are gracile and precise. Optimized filter tunings enhance balanced bass and mids.

PERFECT FIT

A perfect fit is mandatory to bring off the full sound quality, plus it ensures a comfortable fit in order to listen to music for a longer period of time. Therefore the scope of delivery includes 10 different eartips: 5 silicone eartips, 2 flange eartips and 3 pairs of Comply™ foam eartips.

$359.00


Moon

430HAD

The Neo 430HA is a genuine "tour de force" loaded with numerous state-of-the-art features. This fully balanced, pure analog amplifier using a discrete transconductance circuit topology, selectable gain setting (14 or 20dB), an oversized power supply and a defeatable analog crossfeed circuit. Rated at 667mW at 600 ohms and 8W at 50 ohms, the Neo 430HA will effortlessly drive any headphone to its full potential. 

  • Defeatable analog Crossfeed circuit for better 'spacialization' and listening comfort
  • Balanced Outputs hidden behind sliding front panel window (2x 3-pin XLR, 1x 4-pin XLR), as well as a 1/4" TRS jack, and both fixed & variable line-level single-ended RCA stereo pairs
  • An oversized power supply using 2 toroidal transformers in conjunction with 8 stages of DC voltage regulation
  • 4 stages of our M-LoVo (MOON Low Voltage) DC regulation circuit; a highly sophisticated circuit that is virtually free of noise, yielding an exceptionally fast, precise, and stable DC voltage. This circuit, found in the Evolution series 810LP Phono Preamplifier and 740P Preamplifier, results in a power supply with a virtually unmeasureable noise floor
  • M-eVOL2 volume control circuit using MDAC's (operating in a current steering R-2R configuration) which alter the audio signal's amplitude, yielding no sonic degradation of the signal, regardless of the selected volume setting. This circuit, found in the Evolution series 600i & 700i Integrated Amplifiers and 740P Preamplifier, offers 530 steps and channel matching of 0.1dB
  • 1 balanced XLR input and 3 single-ended line-level inputs, including a front-mounted 1/8" mini-jack for personal media players
  • Optional DAC with four (4) digital inputs (S/PDIF x 2, TosLink x 1 & USB x 1) allowing for use with virtually any digital source; Supports DSD64, DSD128 and DSD256 (USB input only); Supports PCM 16/44.4kHz to 24/192kHz (all inputs) and up to PCM 32/384kHz (USB input only)
  • EuP compatible eco-friendly power (less than 0.5W) in standby mode with defeatable 20 minutes inactivity "auto shut off"
  • 12 Volt trigger output for remote operations
  • RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates
  • IR input for external control
  • SimLink™ controller port for 2-way communications with other compatible MOON components
  • Rigid chassis construction to minimize the effects of external vibrations
  • Optimized selection of very high quality electronic components
  • Low operating temperature for an ultra-long life expectancy
  • Includes CRM-3 remote control.

$4,900.00


230HAD

The possibilities are endless...The Neo 230HAD is a headphone amplifier, a DAC and a line-stage preamplifier all housed in one very stylish package. What else could you possibly ask for?

  • Pure analog amplifier includes a transconductance circuit topology
  • Inputs include 1 single-ended on rear-mounted RCA’s and1 single-ended on 1/8” jack located on the front panel
  • Outputs include a 1/4" TRS headphone jack on the front panel, as well as, both fixed and variable line-level single-ended RCA stereo pairs in the rear
  • An oversized power supply using 1 toroidal transformers in conjunction with 8 stages of DC voltage regulation (4 each for the amplifier and the DAC)
  • Digital-to-Analog Converter (DAC) with four (4) digital inputs (S/PDIF x 2, TosLink x 1 & USB x 1) allowing for use with virtually any digital source; Supports DSD64, DSD128 and DSD256 (USB input only); Supports PCM 16/44.4kHz to 24/192kHz (all inputs) and up to PCM 32/384kHz (USB input only)
  • Rigid chassis construction to minimize the effects of external vibrations
  • Optimized selection of very high quality electronic components throughout
  • Low operating temperature for an ultra-long life expectancy
  • Includes CRM-2 remote control.
  •  DSD64/128/256
  • ƒ  PCM up to 32-bit/384kHz
  • ƒ  High quality headphone amplifier derived from the 430HA
  • ƒ  4x digital inputs, 2x analog outputs
  • ƒ  Variable (preamp) output
  • ƒ  CRM-2 Remote Control
  • ƒ  7.5’(19cm) wide

$1,750.00


Sennheiser

HD 800s

Crafted for perfection, the HD 800 and the HD 800 S are precision-built in Germany from only the finest materials and components. The transducer is encased by stainless steel, while the headband and headphone mounting utilises the most advanced materials developed in the aerospace industry for high strength with minimal weight.

  • Open, circum-aural dynamic stereo headphones
  • Enhanced sound reproduction achieved through absorber technology
  • Additional cable with balanced XLR4 connector
  • Natural hearing experience - realistic and natural sound field with minimal resonance
  • Biggest transducers ever used in headphones including new innovative dynamic transducer design
  • Uncovered earcups for enhanced acoustics
  • Handcrafted ear pads, made of high-quality microfiber fabric
  • Specially tuned balanced, impedance matching cable with low capacitance
  • 2 year warranty
  • Impedance: 300 Ω
  • Audio-XLR connector: XLR4
  • Frequency response: 4 - 51,000 Hz (-10 dB)
  • THD, total harmonic distortion: 0.02 % (1 kHz 1 Vrms)
  • Contact pressure: ~ 3,4 N (± 0,3 N)
  • Ear coupling: Circumaural
  • Jack plug: 6.3mm/ XLR4
  • Cable length: 3m
  • Transducer principle: Dynamic Open
  • Weight w/o cable: 330 g

$2,199.95 a pair


HD 800

Open back over ear audiophile headphones

These headphones are top-of-the line audio technology at its finest. Hand assembled in Germany with top quality materials and using the largest transducers ever, these provide an unmatched natural listening experience

  • New reference class in wired headphones
  • Open, circum-aural dynamic stereo headphones
  • Natural hearing experience - realistic and natural sound field with minimal resonance
  • Biggest transducers ever used in headphones up to today - new innovative dynamic transducer design
  • Uncovered earcups for acoustic and stylistic reasons
  • Handcrafted ear pads, made of high-quality microfiber fabric
  • Metal headband with inner damping element
  • Specially tuned symmetrical, impedance matching cable with low capacitance
  • Special high precision headphone connectors
  • 2 year warranty

 

 $1,899.95 a pair


HD 700

Open back over ear audiophile headphones

These awesome, open circumaural headphones with tuned, highly-efficient drivers and only the finest acoustic materials will please even the most discriminating audiophile. They also look and feel great.

  • Open, circumaural dynamic stereo headphones
  • Outstanding soundstage with a warm and balanced audio reproduction
  • Specially-tuned, highly efficient drivers capable of delivering high sound pressure levels
  • Highly optimised ventilated magnet system minimises air turbulence and harmonic, intermodulation distortion
  • Open-back ear cups facilitate transparent sound while showcasing cutting-edge industrial design
  • and natural sound experience
  • Ultra comfortable and luxurious velour earpads, silicone-treated headband for minimal headband resonance
  • Innovative and highly aesthetic dual-material yoke for better stability and eliminates negative influences to sound quality
  • Very low THD achieved by top-notch and extremely stable internal damping element
  • Symmetrical and detachable silver-plated oxygen-free four-wire copper cable for better conductivity at higher frequencies
  • Designed in Germany, assembled in Ireland
  • 2 year warranty

$999.95 a pair


IE 800

At the heart of the IE 800 are several small but invaluable breakthroughs, like the perfected extra wide band (XWB) transducer system. Flaunting a diameter of only 7 mm, it is currently the smallest extra wide-band sound transducer available in dynamic ear canal phones and promises distortion-free sound, capable of performing even at high sound pressure levels.

  • Dynamic linear-phase driver with extremely wide bandwidth (XWB)
  • Very low overall harmonic distortion
  • Ergonomic, oval-shaped ear adaptors for maximum comfort
  • Two protective meshes - one situated in the ear cushion and one in the cone, effectively protects against dirt contamination and for easy cleaning
  • Attenuated dual-chamber absorber (D2CA)
  • Extremely deep, distortion-free bass
  • Premium leather carrying case
  • 2 year warranty

$999.95 a pair


HD 650

Open back over ear audiophile headphones

Here's a perfect addition to your high-end home entertainment system. Hand-picked components, special acoustic materials and exceptional engineering make these headphones an audiophile's dream.

  • Systems with narrow tolerances (± 1 dB), hand-picked in pairs
  • Highly optimized magnet systems for minimum harmonic and intermodulation distortion
  • High-quality titanium/silver finish
  • A specially developed damping element, made from fine acoustic metal mesh, ensures a precise damping over the entire diaphragm surface, highly constant in all climates.
  • Specially modulated connecting cable (detachable) made from highly conductive OFC copper, Kevlar-reinforced, with very low handling noise, i.e. low structure-borne sound sensitivity
  • Extremely lightweight aluminium voice coils ensure excellent transient response
  • Gold plated 1/4" jack plug with adaptor lead to 3.5 mm jack plug
  • 2-year warranty

$649.95 a pair


HD 630VB

On the go or at home, Sennheiser’s new HD 630VB delivers amazing performance and a host of features not normally found on audiophile headphones. The cutting-edge transducers provide clear, powerful sound reproduction, allowing you to hear the subtle nuances of your favorite music recordings. You’ll experience audio with a level of realism that is nothing short of astounding.

  • Ear coupling: Circumaural
  • Jack plug: 3.5 mm (straight)
  • Cable length: 1.2 m
  • Transducer principle: Dynamic Closed
  • Bass Boost: +/- 5dB at 50 Hz
  • Impedance: 23 Ω
  • Frequency response (Headphones): 10-42,000 Hz
  • Sound pressure level (SPL): 114dB (1 kHz/1Vrm)
  • THD, total harmonic distortion: <0.08% (1kHz, 100dB)
  • Contact pressure: 5.5~6.8N

$679.95 a pair


HD 600

The HD 600 is an audiophile-grade open dynamic hi-fi/professional stereo headphone. The advanced diaphragm design eliminates standing waves resulting in a clean sound free of artifacts and acoustical disturbances. The HD 600 is a fantastic addition to a hi-fi stack or dedicated listening room, and is a favorite among mastering engineers worldwide. 

  • High-quality open metal mesh grilles deliver extremely transparent sound
  • Computer optimized magnet systems minimize harmonic and intermodulation distortion
  • Extremely lightweight aluminum voice coils ensure excellent transient response
  • Neodymium ferrous magnet systems ensure optimum sensitivity and an excellent dynamic response
  • Exceptionally natural, spatial and accurate sound
  • Detachable, OFC copper cable
  • Built-tough with a 2 YEAR warranty

$529.95 a pair


HD 599   

The open back HD 599 delivers impressively natural spatial performance. Topping Sennheiser’s 500 series, the full sized premium headphone offers near-audiophile levels of sound quality and exceptional wearing comfort thanks to the large ear cups and soft replaceable ear pads.

  • Color: Ivory
  • Impedance: 50 Ω
  • Frequency response: 12- 38,500 Hz
  • Sound pressure level (SPL): 106dBSPL (1kHz/1Vrms)
  • THD, total harmonic distortion: <0.1% (1kHz, 100dBSPL)

$329.95 a pair


HD1

Passion for peak performance. Sennheiser's HD1 - Closed circumaural headset offering optimum noise isolation and comfort

  • Bluetooth Version: Bluetooth 4.0 + EDR
  • Supported Profiles: A2DP + AVRCP + HSP + HFP
  • Ear coupling: Circumaural
  • Jack plug: 3.5 mm, angled
  • Cable length: 1.4 m (Detachable)
  • Transducer principle: Dynamic, Closed
  • Attenuation: Up to 25dB
  • Charging time: Approx. 3 hrs
  • Operating time: 22hrs (HFP + ANC)
  • Battery Specification: Rechargeable Lithium-ion Polymer (600mAh)
  • Codecs: apt-X®
  • NoiseGard™ noise compensation: NoiseGard™ Hybrid technology with 4 pick-up microphones

$449.95 a pair


HD1 In-ear wireless

The new HD 1 In-Ear Wireless combines sleek design, immaculate sound performance and take-anywhere mobility. This premium neckband headset made of luxurious, high-quality materials, offers exceptional hi-fi wireless sound assured by Bluetooth 4.1 and Qualcomm® apt-X™. With NFC for simple one touch pairing, an integrated microphone, and a ten-hour battery life, it is the perfect companion to mobile devices.

  • Transducer principle: Dynamic
  • Weight: 312 g
  • Charging time: Approx. 1.5 hrs
  • Battery Specification: Rechargeable Lithium-ion Polymer (170mAh)
  • Connection: Bluetooth 4.1, NFC
  • Battery time: 10 hrs (A2DP/HFP)
  • Frequency response: 15Hz – 22,000Hz
  • Sound pressure level (SPL): 112 dB (1 kHz/0 dBFS)
  • THD, total harmonic distortion: <0.5% (1kHz/100dB SPL)
  • Pick-up pattern: Omni-directional
  • Sensitivity as per 121 TR 9-5: - 44 dB V/Pa

$279.95 a pair


HD1 In-ear

Luscious listening. This earphone is the smallest member of the HD 1
product family. Still, it offers uncompromisingly clear, brilliant and powerful sound like all HD 1s, as well as a wealth of valuable quality details – from the nanoprecise, stainless-steel sound tunnel to the three-button multifunction remote with integrated microphone.

  • Impedance: 18 Ω
  • Frequency response (Microphone): 100 – 10,000 Hz
  • Frequency response (Headphones): 15Hz - 22000Hz
  • Sound pressure level (SPL): 118 dB (1kHz/1Vrms)
  • THD, total harmonic distortion: <0.5 % (1 kHz, 100 dB SPL)
  • Jack plug: 3.5 mm angled
  • Cable length: 1.3 m
  • Weight: 16 g
  • Pick-up pattern: Omni-Directional
  • Microphone sensitivity:- 44 dB V/Pa

$149.95 a pair


HDVA 600

Truly exqusite headphone amplifier

Sound can be perfected with Sennheiser’s HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiser’s audiophile headphones.

  • Consistently symmetrical signal processing for maximum sound quality
  • Symmetrical inputs and outputs simplify integration into a system
  • High-end ALPS quadruple potentiometer achieve perfect channel equality
  • Variable gain factor (five stages) for optimized use of low impedance headphones
  • Sophisticated metal housing to protect against signal scatter and vibration
  • Solid controls turned from solid metal, providing the utmost in long-term stability

$1,899.00


HDVD 800

Arguably defines the state of the art

With Sennheiser’s HDVD 800, sound is perfect. The HDVD 800 is able to connect with digital sources and is equipped with a high-quality Burr-Brown digital/analog converter (DAC) that converts digital audio data into analog signals with a resolution of 24 bits and a sampling rate of up to 192 kHz. This enables the HDVD 800 to transmit the entire frequency spectrum of high-end audio sources without any loss of frequencies.

In addition to the symmetrical inputs, the HDVD 800 also has an asymmetrical input socket; incoming signals are symmetrized before further processing takes place. Digital sources can be connected to the rear of the unit via an XLR (AES/EBU) input, optical and coaxial (S/PDIF) digital inputs or USB. All digital inputs accept signals up to 24 bit at 192 KHz*. Designed and manufactured in Germany, this high-end, solid-state amplifier harmonize perfectly and deliver an ultimate acoustic performance when paired with any of Sennheiser’s audiophile headphones.

  • D/A transducer for all common formats up to 24 bit / 192 kHz
  • D/A transducer can be used for CD and DVD players
  • AES/BU, S/PDIF, USB inputs
  • Symmetrical (XLR) and asymmetrical (RCA) analog inputs
  • Symmetrical output
  • Sockets for four sets of headphones (two of which symmetrical)                                                  

$2,899.95


Shure

SRH1840

Professional Open Back Headphones

  • SRH1840 Professional Open Back Headphones feature individually matched drivers for unparalleled acoustic performance, including smooth, extended highs and accurate bass.
  • Ideal for for mastering or critical listening
  • Open-back, circumaural design
  • Dual-exit, detachable straight cables
  • Includes SRH1840, threaded 1/4" gold-plated adapter, replacement velour ear pads, 2 cables, hard zippered case, and user guid

$799


SRH1540

Premium Closed-Back Headphones

  • SRH1540 Premium Closed-Back Headphones feature an expansive soundstage with clear, extended highs and warm bass.
  • For professional engineers, musicians, and audiophiles
  • Closed-back circumaural earcups in a lightweight, ergonomic yoke  
  • Dual-exit, detachable straight cables
  • Includes SRH1540, replacement Alcantara™ ear pads, threaded 1/4" gold-plated adapter, hard zippered case, 2 cables, and user guide

$799


 SRH840

Professional Monitoring Headphones
SRH840 Professional Monitoring Headphones feature a precisely tailored frequency response that delivers rich bass, clear mid-range and extended highs.

  • Optimized for studio recording and critical listening
  • Closed-back, circumaural collapsible design
  • Detachable, coiled cable
  • Includes SRH840, threaded 1/4" gold-plated adapter, carrying bag, replacement ear pads, and user guide
  • product specification

$325 a pair



SRH940

Professional Reference Headphones

SRH940 Professional Reference Headphones deliver accurate response across the entire audio spectrum for smooth high-end extension with tight bass.

  • Premium reference headphones for professional audio engineers and in-studio talent
  • Closed-back, collapsible, circumaural design
  • Detachable straight and coiled cables
  • Includes SRH940, hard zippered case, threaded 1/4" gold-plated adapter, coiled cable, straight cable, replacement velour ear pads, and user guide
  • product specification

  

$475 a pair, in stock


SRH1440

Professional Open Back Headphones
SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass.

  • Optimized for for mastering and critical listening
  • Open-back, circumaural design
  • Dual-exit, detachable straight cables
  • Includes SRH1440, threaded 1/4" gold-plated adapter, replacement velour ear pads, 2 cables, hard zippered case, and user guide
  • product specification

  

$475 a pair, in stock



SE846

4-way "State of the Art" Sound Isolating™ Earphones

"One of the best earphones in the world"

SE846 Sound Isolating Earphones feature a groundbreaking low-pass filter that delivers extended high-end clarity and unparalleled low-end performance.

  • Quad High-Definition MicroDrivers
  • Detachable cables with formable wire
  • Available in clear
  • Includes SE846, sleeve fit kit, 2 cases, 46" and 64" cables, cable clip, frequency response customization kit, airline and 1/4" adapters, volume control, and user guide
  • product specifications

 

$1,629 a pair, in stock

 


SE535 & SE535 LTD

Sound Isolating™ Earphones
SE535 Sound Isolating Earphones utilize a dedicated tweeter and dual woofers to deliver spacious sound with rich bass.

Triple High-Definition MicroDrivers
Detachable cables with formable wire
Available in clear or metallic bronze
Includes SE535, sleeve fit kit, carrying case, cleaning tool, adapters, volume control, and user guide

Features

Sound Isolating Design
Comfortable sound isolating sleeves block up to 37 dB of ambient noise.  Sound isolation technology prevents outside noise from interfering with your listening experience, whether onstage or on-the-go.  Shure Sound Isolating Earphones require a proper fit to achieve the best sound.

Ergonomic, professional design
Lightweight, low-profile shape with optimized nozzle angle is designed to rest comfortably in the ear.
Over-the-ear configuration keeps cables out of the way.
Detachable Cable with Wireform Fit

Durable Kevlar™ reinforced cable allows easy replacement or customization.
Formable wire ensures secure placement, and over the ear configuration keeps cables out of the way.
Gold-plated MMCX Connector has a lock-snap mechanism allowing 360 degree rotation for comfortable fit.
Premium Fit Kit Includes

Sound Isolating Sleeves
The role of the included sound isolating sleeves is twofold: blocking ambient noise and ensuring a comfortable, customized fit. Because every ear is different, the Fit Kit includes three sizes (S, M, L) of the flex and black foam sleeves as well as 1 pair of triple flange and 1 pair of universal fit yellow foam sleeves. Experiment with the size and style that creates the best fit for you. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear.

Carrying Case
A durable and compact carrying case is included to provide a convenient, tangle-free solution to store and travel with your earphones.

1/4" Adapter
An 1/8" (3.5 mm) to 1/4" converter for all Shure earphones that offers a solution for home stereos or other applications with 1/4" jacks.

Volume Control (level attenuator)
 Allows for comfortable listening from any high-output audio source, including airplane armrests. 

Airline Adapter
Optimizes compatibility with European airplane armrests.

$815 regular model, in stock

$899 red limited edition model
 


SE215

Sound Isolating™ Earphones
SE215 Sound Isolating Earphones feature detailed sound with enhanced bass.

"The affordable audiophile choice with fabulous sound isolation as a bonus, plus they are comfortable to boot"

Single Dynamic MicroDriver
Detachable cables with formable wire
Available in clear and translucent black
Includes SE215, sleeve fit kit, cleaning tool, carrying case, and user guide

 

product specifications

$160 a pair, in stock


SE112

Sound Isolating™ Earphones
SE112 Sound Isolating Earphones feature great sound with deep bass.

"Incredible value and build form the masters of earphones"

Dynamic MicroDriver
Fixed cables
Available in grey
Includes SE112, sleeve fit kit, nozzle cleaning tool, drawstring pouch, and user guide

product specification

$79 a pair, in stock

$95 a pair for the SE112M+ 

 

 


Teac

HA-P50

High quality, portable headphone amplifier with built-in 24/96 USB DAC, providing high-resolution 'go anywhere' listening from iPhone, Android and PC/Mac

Headphone output

  • Connector: 3.5mm (1/8") stereo mini jack
  • Effective maximum output: 160mW+160mW(32Ω, 1KHz, 10%, JEITA) / 65mW+65mW(300Ω, 1KHz, 10%, JEITA) / 35mW+35mW(600Ω, 1KHz, 10%, JEITA)
  • Compatible impedance: 8Ω to 600Ω
  • Analog audio input 
  • Connector: 3.5mm (1/8") stereo mini jack (combination optical digital input; automatic detection)
  • Digital audio inputs
  • USB 1 
    • Connector: USB Micro B-type(USB2.0)
    • Compatible product: PCs (Windows, Macintosh) with the compatible product TEAC HR Audio Player installed
    • Compatible Formats: (PCM)96kHz/24bit
  • USB 2 
    • Connector: USB A-type, (USB2.0)
    • Compatible products: iPhone 5s, iPhone 5c, iPhone 5, iPad Air, iPad (4th generation), iPad mini. iPod touch (5th generation), iPod nano (7th generation), Android (AOA2.0 compatible Android phone handset)
    • Compatible Formats
    • iOS: 96kHz/24bit (when using TEAC HR Audio Player for iOS)
    • Android: 44.1kHz/16bit (AOA2.0 compatible Android phone handset)
  • OPTICAL 
    • Connector: optical mini-jack (combination AUDIO IN port; automatic signal detection)
  • DAC Section
    • D/A converter: BurrBrown PCM5102
  • Battery: Built-in rechargeable Li-ion battery
  • Battery capacity: 2,100mAh
  • Recharging method: USB (via USB-A DC recharging cable)
  • Continuous battery life: Approximately 8 hours (when using digital input)
  • Dimensions: 64(W)×21.7(H)×112(D)mm (excluding protruding guards)
  • 2.5"(W)×0.85"(H)×4.4"(D) (excluding protruding guards)
  • Weight: 210g / 7.4oz
  • Included accessories: Electric recharging cable included (DC plug – USB A plug) Computer connection cable (USB micro B plug – USB A plug) Rubber fixing straps for fastening×2
  • Audio Performance
    • Frequency response: 10Hz to 100kHz(when using AUDIO IN input)
    • Overall distortion: 0.001%(32Ω, 1kHz, 100mW + 100mW, JEITA)

$329.99 in stock


AI-101DA

Integrated Amplifier with USB DAC

  • DAC Section
    • D/A Converter: BurrBrown PCM1796
    • Up-conversion: Supported
  • Bluetooth® Section
    • Bluetooth® version: 3.0
    • Output: Class 2
    • Supported Profile: A2DP
    • Supported Codec: aptX®, SBC, AAC
  • Output Power 
    • Connector: Screw-type (compatible with banana plug)
    • Maximum Output Power: 26W + 26W (4 ohms, 1kHz, 10% THD, JEITA)
    • Rated Output Power: 20W + 20W (4 ohms, 1kHz, THD 1%, JEITA)
    • Supported Impedance: 4 ohms to 8 ohms

Digital Audio Inputs

  • USB 
    • Connector: USB B-type (USB2.0)
    • Transmission Mode: Asynchronous Mode
    • Supported File Format: PCM
    • PCM: 32k / 44.1k / 48k / 88.2k / 96k / 128k / 176.4k / 192kHz, 16bit/24bit
  • OPTICAL 
    • Connectors: Optical digital connector x2
    • Supported File Format: PCM
    • PCM: 32k / 44.1k / 48l/ 88.2k / 96kHz, 16bit/24bit
    • Input Level: -24 to -14.5dBm peak

Analog Audio Input

  • Connector: 1/8" (3.5mm) Stereo Mini Jack
  • Headphones Output
    • Connector: 1/8" (3.5mm) Stereo Mini Jack
    • Output Power: 100mW + 100mW (with 32 ohms load, 1kHz)
    • THD: 0.03%
  • Subwoofer Preout
    • Connector: RCA Pin Jack
  • Operation Power: AC 120V, 60Hz (US/Canada)
  • Power Consumption: 28W
  • Dimensions (including protrusions): 7.2"(W) x 2.1"(H) x 7.5"(D) / 182(W) x 53(H) x 191(D) mm
  • Net Weight: 2.7 lbs, 1.2kg

 $499


ud-301-s_p_front.jpg

UD 301 

DAC and Headphone amp,featuring Dual differential DAC & a toroidal power supply. Dual mono headphone amplifier with low noise high performance output stage.

  • DAC Section     
    • D/A Converter: BurrBrown PCM1795×2
    • Up-conversion: 192kHz (user defeatable)

Digital audio inputs     

  • USB Connector: USB Type B (USB2.0)
  • Transmission mode: Asynchronous mode
  • DSD data sampling frequency: 2.8M/5.6M Hz
  • PCM data sampling frequency: 32k/44.1k/48k/88.2k/96k/176.4k/192k Hz
  • Bit rates: 16/24/32 bit
  • COAXIAL Connector: RCA jack
  • PCM data sampling frequency: 32k/44.1k/48k/88.2k/96k/176.4k/192k Hz
  • Bit rates: 16/24 bit
  • Input level: 0.5Vp-p
  • Input impedance: 75 ohms
  • OPTICAL Connector: Optical digital connector
  • PCM data sampling frequency: 32k/44.1k/48k/88.2k/96k Hz
  • Bit rates: 16/24 bit
  • Input level: -24 to -14.5dBm peak     
  • XLR Connector: XLR-3-32
  • Maximum output level: +14dBu(1kHz, full-scale, 10k ohms with load, 0dB when set)
  • Output impedance: 200 ohms
  • RCA Connector: RCA jack
  • Maximum output level: 2.0Vrms(1kHz, full-scale, 10k ohms when loaded)
  • Output impedance: 100 ohms
  • Headphone output Connector: 6.3mm(1/4") stereo phone jack
  • Maximum output: 100mW + +100mW (32 ohms with load, distortion rate 0.1%)
  • Compatibility impedance: 8 ohms to 600 ohms
  • Frequency response: 5Hz to 55kHz (-3dB, in the case of 192kHz sampling frequency)
  • S/N ratio: 105dB
  • Distortion: 0.0015%(1kHz, in the case of 192kHz sampling frequency)    
  • USA/Canada: AC 120V, 60Hz
  • Dimensions: 215(W)×61(H)×238(D)mm, 8.5"(W)×2.4"(H)×9.4"(D)
  • Weight: 2.0kg, 4.4 lbs
  • Accessories: Power cord, Instruction Guide (including Warranty)

$649.99  


AI-301DA

DAC, Integrated amplifier and headphone amp

  • DAC Section
    • D/A Converter: BurrBrown PCM1795
  • Bluetooth® Section
    • Bluetooth® version: V2.1 + EDR
    • Output: Class 2
    • Compatible profiles: aptX®, A2DP, AVRCP
  • Output
    • Connector: Screw-type (banana terminal plugs, AWG8 guage loudspeaker cable compatible)
    • Maximum output: 60W + 60W (4 ohms, 20Hz to 20kHz, JEITA) / 30W + 30W (8 ohms, 20Hz to 20kHz, JEITA)
    • Rated Output: 43W + 43W (4 ohms, 20Hz to 20kHz, THD 0.1%, JEITA) / 22W + 22W (8 ohms, 20Hz to 20kHz, THD 0.1%, JEITA)
    • Supported Impedance: 4 ohms to 8 ohms
  • Analog audio input
    • Connector: RCA jack

Digital audio inputs

  • USB 
    • Connector: USB B-type (USB2.0)
    • Transmission mode: Asynchronous mode
    • DSD data sampling frequency: 2.8M/5.6M Hz
    • PCM data sampling frequency: 32k/44.1k/48k/88.2k/96k/176.4k/192k Hz
    • Bit rates: 16/24/32bit
  • COAXIAL 
    • Connector: RCA jack
    • PCM data sampling frequency: 32k/44.1k/48k/88.2k/96k/176.4k/192k Hz
    • Bit rates: 16/24bit
    • Input level: 0.5Vp-p
    • Input impedance: 75 ohms
  • OPTICAL 
    • Connector: Optical digital connector
    • PCM data sampling frequency: 32k/44.1k/48k/88.2k/96k Hz
    • Bit rates: 16/24bit
    • Input level: -24 to -14.5dBm peak
  • Headphones output
    • Connector: 6.3mm(1/4") stereo phone jack
    • Maximum output: 100mW + 100mW (with 32 ohms load, 1kHz)
    • Distortion rate: 0.005%
  • Power supply
    • USA/Canada: AC 120V, 60Hz
    • Europe: AC 230V, 50Hz
    • Power consumption: 38W
  • Dimensions (including protrusions): 215(W)×61(H)×254(D)mm / 8.5"(W)×2.4"(H)×10"(D)
  • Weight: 2.1kg / 4.6 lbs
  • Accessories: Power cord, remote control (RC-1313), AAA batteries for remote control×2, User Manual (including Warranty)

$649.99 in stock


UD503

Digital to analogue converter and headphone amplifier

  • Connector: RCA jack x 1, 1/8" (3.5mm) Mini jack x 1 (compatible with Optical Input)
  • Input Level: 0.5 Vp-p
  • Input Impedance: 75 ohms
  • Supported Format: DSD, PCM
    • DSD: 2.8MHz (176.4kHz/24bit DoP transfer)
    • PCM: 32k / 44.1k / 48k / 88.2k / 96k / 176.4k /192kHz, 16 / 24bit
  • Optical
    • Connector: TOS link x 1, 1/8" Mini Optical jack x 1 (compatible with Coaxial Input)
    • Input Level: –24.0 to –14/5dBm peak
  • Analog Audio Input
    • Connector: RCA jack x 1 pair
    • Input Impedance: 51k ohms
    • Sensitivity: 130mV
  • Analog Audio Output  
    • Balanced: XLR 3-32 x 1 pair
    • Unbalanced: RCA jack x 1 pair
  • Output Impedance 
    • Balanced: 188 ohms
    • Unbalanced: 150 ohms
  • Frequency Response: 5Hz to 80kHz (+1dB/–3dB)
  • Total Harmonic Distortion: 0.0015% (1kHz, LHF: 20Hz to 20kHz)
  • Overall Dimensions: (including protrusions)11.4" (W) x 3.2" (H) x 9.8" (D)  290 (W) x 81.2 (H) x 248.7 (D) mm
  • Weight: 9.3 lbs. / 4.2 kg

$1,899.99


AI-501DA

Digital to Analogue converter, headphone amp and integrated amplifier

The AI-501DA integrated power amplifier with 192kHz USB digital audio inputs and low power consumption is the powerhouse of TEAC's new 501 series. Hosting a BurrBrown PCM5102 D/A Converter, USB connectivity, Class-D ABLETEC Norway amplifier and a toroidal-core power transformer makes the AI-501DA a key component for the 501 series or any other 2-channel audio system.

  • 60W + 60W (4 ohms, 20Hz to 20kHz)
  • 30W + 30W (8 ohms, 20Hz to 20kHz)
  • 4 ohms to 8 ohms
  • Digital Inputs, Type B connector x 1 (USB 2.0 compliant), coaxial x1 and optical x1
  • Analogue inputs, 
  • Headphone, Standard 6.3mm stereo jack
  • Headphone maximum output level, 50mW + 50mW or more (32 ohms, THD+N 0.1%)
  • Overall dimensions, 290(W) x 81.2(H) x 264(D) mm, 11.4"(W) x 3.2"(H) x 10.4"(D)

was $1,299

now $849, one in stock


HA501

State of the art  Class A headphone amplifier

Introducing TEAC’s HA-501.  A fully analog, dual monaural headphone amplifier. Part of the 501 series, this Class-A amplifier delivers superior sound quality, a sleek, modern look, all encased in a rugged but compact design. The HA-501 supplies regular headphone listeners with superb sound quality, features and adaptable options that cannot be found in regular headphone amplifiers. Pair it with your favourite headphones  and take advantage of DC Servo Technology, Switchable damping Factors, High Output Power, a large Toroidal-Core Power Transformer.

  • Balanced Input (Rear): 1 pair
  • Connectors: XLR-3-31 (1:GND, 2:HOT, 3:COLD)
  • Line Input (Rear): 2 pairs (LINE1, LINE2)
  • Connectors: RCA Pin Jack (Gold-plated)
  • Auxiliary Input (Front, AUX)      
  • Connectors: 1/8" (3.5mm) Stereo Mini Jack 
  • Headphone Output (Front)      
  • Connectors: 1/4" (6.35mm) Stereo Jack
  • Supported Headphone Impedance: 16 ohms - 600 ohms
  • Max Output Level: 1,400mW + 1,400mW (at 32 ohms) / 135mW + 135mW (at 600 ohms)
  • Rated Output Level: 600mW + 600mW (at 32 ohms) / 34mW + 34mW (at 600 ohms)
  • THD: 0.002% (Input 1V, Output 1V, at 32 ohms) / 0.01% (Input 1V, Output 600mW, at 32 ohms)
  • S/N Ratio: 110dB (RCA Input, 2Vrms 1kHz, A-weighted)
  • Frequency Response: 2Hz – 100kHz (+0dB/-3dB) / 10Hz – 100kHz (+/-3dB)
  • Line Output (Rear)
  • Connectors: RCA Pin Jack (Gold-plated)
  • Output Level Selector: Fixed, Variable, Off
  • Overall Dimensions: 290 (W) x 81.2 (H) x 244 (D) mm, 11.4" (W) x 3.2" (H) x 9.6" (D)
  • Net Weight: 4.1kg, 9 lbs
     

$1,299.99


AX-501

  • Maximum output: 120W + 120W (4 ohms, 1kHz, JEITA) / 70W + 70W (8 ohms, 1kHz, JEITA)
  • Rated Output: 100W + 100W (4 ohms, 1kHz, JEITA) / 65W + 65W (8 ohms, 1kHz, JEITA)
  • Compatible speaker impedance range: 4 ohms to 8 ohms
  • Total harmonic distortion: 0.005% (8 ohms, 1kHz, 1W, JEITA)
  • S/N ratio (input short) 
  • LINE IN: 100dB ( IHF-A)
  • Frequency range: 10Hz to 60kHz(+1dB, -5dB)
  • inputs 
  • Balanced 
    • Connecters: XLR x 1pair
    • Nominal input level: 1.2Vrms
    • Maximum input level: 7.7Vrms
  • Unbalanced 
    • Connecters: RCA jacks x 3pairs
    • Nominal input level: 0.3Vrms
    • Maximum input level: 3.5Vrms
  • Headphones output 
  • Connector: Standard 6.3mm stereo jack
  • Maximum output level: 50mW + 50mW or more(32 ohms, THD+N 0.005%)
  • Power supply: 
    • Model for Europe: AC220 to 240V, 50Hz
    • Model for USA/Canada: AC120V, 60Hz
    • Power Consumption: 68W
  • Dimensions: (including protrusions)290 (W) x 81.2 (H) x 264 (D)mm / 11 1/2"(W) x 3 1/4"(H) x 10 1/2"(D)
  • Weight: 4.0kg

$1,449.99